Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Has been cancelled
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py --ignore=tests/proxy_unit_tests/test_p… (push) Has been cancelled
Two changes, both test-only:
- Configure the aiohttp session with TCPConnector(force_close=True) and an
explicit ClientTimeout(total=30, connect=10). Prevents reuse of idle TCP
connections that the proxy/kernel may have closed during the long window
between setup POSTs and the later poll loop, and surfaces a blocked proxy
event loop quickly instead of hanging on aiohttp's 5-minute default.
- In poll_key_spend_until, catch aiohttp.ClientError and asyncio.TimeoutError
around the single /key/info call. A transient transport hiccup now logs and
retries on the next tick instead of failing the entire polling loop.
Addresses the ConnectionTimeoutError observed on the first /key/info call
after the 20 chat completions.
store_in_memory_spend_updates_in_redis drained the in-memory queues
into local variables before the rpush pipeline. If rpush raised (cloud
Redis hiccup, timeout, connection blip), those already-drained
transactions were garbage-collected with the scheduler job, silently
losing all spend aggregated during that tick.
Wrap the rpush in try/except. On failure, re-enqueue the aggregated
transactions into their respective in-memory queues so the next
scheduler tick retries.
Add a unit test that seeds real queues, simulates an rpush failure,
and asserts the transactions land back in-memory.
Replace the calibration step (one request + 10-minute poll) with an
independent ground truth computed from response usage via
litellm.cost_per_token. All N requests are made up front, so a single
dropped Redis write no longer kills the test.
Add /health/readiness checks at test start and on poll timeout so the
failure message surfaces proxy state (db, cache) instead of "calibration
timed out".
Set PROXY_BATCH_WRITE_AT=2 in the spend tracking CI job to shorten the
scheduler flush window.
Restore guardrail spend/UI event_type wiring, request_data on streaming
OUTPUT paths, and centralized match redaction after the upstream revert.
Made-with: Cursor
Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Has been cancelled
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py --ignore=tests/proxy_unit_tests/test_p… (push) Has been cancelled
* add moonshot/kimi-k2.6 to model registry
* add moonshot/kimi-k2.6 to backup model registry
* add tests for moonshot/kimi-k2.6 model registry
* fix moonshot/kimi-k2.6 pricing and add reasoning support
* fix moonshot/kimi-k2.6 pricing and add reasoning support in backup
* update kimi-k2.6 tests: fix pricing, add tool_choice and reasoning checks
* fix: load kimi-k2.6 registry tests from local backup instead of remote cost map
Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Waiting to run
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py --ignore=tests/proxy_unit_tests/test_p… (push) Waiting to run
Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Has been cancelled
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py --ignore=tests/proxy_unit_tests/test_p… (push) Has been cancelled
P1 review: adaptive_router.py had a top-level import of
AdaptiveRouterUpdateQueue from litellm.proxy.db, which broke the
SDK/proxy boundary that every other router strategy respects. No
other router_strategy module imports from litellm.proxy at module
level.
The queue only depends on litellm._logging — it never needed to
live under litellm.proxy. Moved:
litellm/proxy/db/db_transaction_queue/adaptive_router_update_queue.py
→ litellm/router_strategy/adaptive_router/update_queue.py
tests/test_litellm/proxy/db/db_transaction_queue/
test_adaptive_router_update_queue.py
→ tests/test_litellm/router_strategy/adaptive_router/test_update_queue.py
Also switched the queue's logger from verbose_proxy_logger to
verbose_router_logger to match the new module's ownership.
P2 review: drop unused constant STAGNATION_JACCARD_EXACT from
config.py — it was defined but never referenced.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously, members added to a team without an explicit per-member budget were
all linked to the same `litellm_budgettable` row referenced by the team's
`metadata.team_member_budget_id`. Updating one member's budget via
`/team/member_update` mutated the shared row and silently changed every other
member's budget too.
Now both write paths produce a private, per-member budget:
- `add_new_member` clones the team's default budget into a fresh row when a
member is added without `max_budget_in_team`/`allowed_models`. If no team
default exists, the membership is created with no budget.
- `_upsert_budget_and_membership` detects when an existing membership still
points at the team's default budget id and clones-on-write, relinking the
membership to the new private budget before applying the update.
- `team_member_update` reads `team_member_budget_id` from team metadata and
passes it through so the helper can make this distinction.
Adds unit tests for clone-on-write, in-place update of a private budget, and
the no-default-no-budget add path.
Made-with: Cursor
P1: start the adaptive-router flusher loop unconditionally at proxy boot
instead of gating on 'adaptive_routers is non-empty'. Adaptive routers
added via /config/reload after boot now have their queues drained.
State is lazy-loaded per router on first flush tick (new _state_loaded
flag on AdaptiveRouter) so hot-reloaded routers still get their
persisted priors.
P2: _finalize_adaptive_router_if_configured now prunes stale
AdaptiveRouterPostCallHook callbacks from every litellm callback list
before registering new ones. Without this, every Router replacement
left the old hooks wired up in litellm.callbacks and double-fired
signal recording for every request. Uses
logging_callback_manager.remove_callbacks_by_type (same pattern as the
semantic tool filter).
CI fixes:
- black --check failure: reformatted litellm/router.py
- schema migration diff: aligned @@index with the explicit index name
('idx_adaptive_router_session_activity') from the original migration
by adding 'map:' to all three schema.prisma copies. No new migration
needed.
Tests: 1 new covering the prune-on-hot-reload path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Mark last_updated_at (AdaptiveRouterState) and last_activity_at
(AdaptiveRouterSession) with @updatedAt so Prisma refreshes the
timestamps on every write. Without this the fields stayed frozen at
INSERT time and the last_activity_at index was misleading for any
future TTL/eviction logic. Applied to all three schema.prisma copies;
no migration SQL change needed (Prisma @updatedAt is a client-side
annotation that doesn't touch DDL).
- get_state_snapshot: report cell.total_samples instead of alpha+beta
for the 'samples' field. The previous value inflated every cell by
the COLD_START_MASS prior (e.g. showed 10.0 before any real traffic
arrived), which confused operators reading /adaptive_router/.../state.
Updated docs + the snapshot test to match.
Also fixes two pre-existing merge-break syntax errors in router.py
(missing ')' on the AdaptiveRouter TYPE_CHECKING import; truncated
async_pre_routing_hook dispatch call for the adaptive router branch)
that were masking the rest of the file from the interpreter.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Has been cancelled
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py --ignore=tests/proxy_unit_tests/test_p… (push) Has been cancelled
Existing tests pinned exact kwargs on `PrismaManager.setup_database`,
but the opt-in v2 resolver added `use_v2_resolver=False` to every call.
Update the three assertions to reflect the new signature.
Fixes:
- TestHealthAppFactory::test_use_prisma_db_push_flag_behavior
- TestHealthAppFactory::test_startup_fails_when_db_setup_fails
Adds end-to-end CI coverage for `--use_v2_migration_resolver` via a new
job `installing_litellm_on_python_v2_migration_resolver`:
- Clones the pytest smoke path from `installing_litellm_on_python` but
uses a local Postgres sidecar instead of the shared DB to prevent
collisions with the v1 variant.
- Runs only the new `test_litellm_proxy_server_config_no_general_settings_v2_resolver`
which spawns the proxy with `--use_v2_migration_resolver` and smoke-tests
`/health/liveliness` and `/chat/completions`.
Refactors `test_basic_python_version.py`:
- Extracts the proxy spawn + smoke-test body into `_run_proxy_server_smoke_test`
so the v1 and v2 tests share the same code path.
- The existing `test_litellm_proxy_server_config_no_general_settings` is
now a thin wrapper that passes no extra args (v1 default, unchanged).
- Adds `..._v2_resolver` variant that passes `--use_v2_migration_resolver`.
The existing `installing_litellm_on_python` / `installing_litellm_on_python_3_13`
jobs filter out the v2 variant via `-k "not v2_resolver"` so they keep
running only against their shared DB, unchanged behavior.
Adds total_spend column to LiteLLM_TeamMembership that accumulates
continuously and is not zeroed by the budget cycle reset job. This
enables UI surfaces to distinguish current-cycle spend (the existing
spend column, which resets) from lifetime spend per team member.
Also exposes budget_reset_at on LiteLLM_BudgetTable so /team/info
callers can see when a member's budget window next resets. The field
was already stored in the DB but stripped by the response Pydantic
model.
Includes regression tests that:
- Guard the reset job against ever writing total_spend: 0
- Verify the spend writer increments both spend and total_spend in
one UPDATE statement.
Two fail-safes for the /v1/messages → Bedrock Invoke pass-through so new
Anthropic-only extensions Claude Code starts sending can't reach Bedrock
and trigger a 400 "Extra inputs are not permitted":
1. Top-level body fields are filtered to a typed allowlist. New
`BedrockInvokeAnthropicMessagesRequest` TypedDict (in
`litellm/types/llms/bedrock.py`) captures the Bedrock Invoke Anthropic
Messages body schema; the runtime allowlist is derived from its
`__annotations__` so the type and the filter can't drift. Anchored to
the AWS reference page in docstrings + transform comment. An
exact-set test pins the resolved allowlist so any future edit forces
conscious review.
Drops context_management, output_config, speed, mcp_servers,
container, inference_geo, internal litellm_metadata, and any future
Anthropic addition. output_format stays as an active inline-schema
conversion (not just a strip).
2. The anthropic-beta header list is filtered + transformed against the
bedrock mapping for ALL betas, not just auto-injected ones. The
previous code union'd user-provided betas back in unfiltered, so a
client on a new Anthropic-direct beta (e.g. advisor-tool-…,
context-management-…) could still pin the request to fail. In a proxy
context the client can't know the backend is Bedrock; the provider
mapping is authoritative. User-provided drops are logged at WARNING
so intentional overrides leave a breadcrumb.
Updates one existing test that happened to assert on the old buggy
pass-through (it used output-128k-2025-02-19, which is null in the
bedrock mapping and would 400 at runtime); rewrote it against a
bedrock-supported beta.
Scope: messages/invoke only. The same user-beta bypass exists in
chat/invoke but that's a different code path with different
user-expectation trade-offs — follow-up.
Add a router utils unit test that directly exercises _filter_deployments_by_model_access_groups for access-group-only key permissions.
Made-with: Cursor
Filter router candidate deployments by caller-authorized model access groups when access is granted via group membership, preventing cross-group load balancing for shared public model names.
Made-with: Cursor
VertexAIImagenImageEditConfig.get_complete_url was resolving vertex_project
and vertex_location only from env vars and global settings, ignoring
litellm_params. Users supplying project/location exclusively via YAML
config would get a ValueError or wrong URL even after auth headers were fixed.
Mirrors the pattern already used by VertexAIGeminiImageEditConfig and
image_generation counterpart (safe_get_vertex_ai_project/location).
Also fixes api_key type hint in MockImageEditConfig (str -> Optional[str])
and adds a test covering get_complete_url credential resolution.
Made-with: Cursor
Adds three test cases to prevent regression of the Vertex AI image_edit
credentials bug:
1. test_validate_environment_signature_includes_litellm_params: ensures
all image-edit configs accept litellm_params (contract for the handler)
2. test_vertex_gemini_image_edit_reads_credentials_from_litellm_params:
verifies Gemini config reads from litellm_params first
3. test_vertex_imagen_image_edit_reads_credentials_from_litellm_params:
verifies Imagen config reads from litellm_params first
These tests catch if the fix is accidentally reverted or if new image-edit
configs are added without the litellm_params parameter.
Made-with: Cursor
When aimage_edit or image_edit was called with Vertex AI Gemini/Imagen models
via YAML-style config (vertex_project / vertex_credentials in proxy YAML),
the credentials were dropped during handler-to-config plumbing, causing
fallback to Application Default Credentials and DefaultCredentialsError.
Root cause: image_edit_handler and async_image_edit_handler did not pass
litellm_params to validate_environment, unlike image_generation_handler.
Fixes:
1. Widen BaseImageEditConfig.validate_environment signature to accept
litellm_params and api_base (optional kwargs).
2. Forward dict(litellm_params) and litellm_params.api_base from both
sync and async image_edit handlers to validate_environment.
3. Update VertexAIImagenImageEditConfig.validate_environment to read
vertex_ai_project/vertex_ai_credentials from litellm_params first,
matching Gemini config pattern (secondary latent bug fix).
4. Widen all image-edit config override signatures to match base.
Made-with: Cursor
Addresses review feedback on the snapshot approach:
1. Class-instance mutable state
The snapshot only covers primitives + collections + None. Class
instances (DualCache, LLMClientCache) weren't reset between tests,
so in-place cache mutations could leak. Can't deepcopy these — they
hold thread locks — but they expose flush_cache(). Collect every
module attribute whose value implements flush_cache() at conftest
import, and invoke it per-test alongside the snapshot restore.
2. Silent skips are now warnings
_snapshot_mutable_state and _restore_mutable_state previously
swallowed exceptions, so if a future attr gained a property without
a setter (or other non-round-trippable state), an isolation gap
would have no signal. Emit warnings.warn on each failure path.
3. Docstring
Explicitly documents what IS and IS NOT reset, and tells authors to
use monkeypatch.setattr() for in-place mutations of instances
without flush_cache() (ProxyLogging, JWTHandler, etc.).
The previous snapshot only tracked list/dict/set values. Tests mutate
scalar module attrs too — master_key, premium_user, prisma_client — and
importlib.reload used to reset those implicitly. Under the snapshot
approach they were leaking between tests, so test_active_callbacks
failed in CI with "No api key passed in." once an earlier test left
master_key set to sk-1234.
Expand the snapshot to cover primitives (str/int/float/bool/bytes/tuple)
and None-valued attributes. Complex object instances are still skipped
to avoid deepcopy issues.
Add regression tests that mock make_bedrock_api_request and verify
input_type=request uses source=INPUT with user messages, and
input_type=response uses source=OUTPUT with synthetic ModelResponse.
Made-with: Cursor
tests/proxy_unit_tests/conftest.py was calling importlib.reload(litellm) in an
autouse function-scoped fixture, which cost ~17s per test because it re-ran
the full litellm __init__ import chain. With 400+ proxy unit tests, this was
the single biggest driver of CI wall time — 18 of the top 20 slowest durations
in a typical run were just the 17s fixture setup.
Replace the reload with a snapshot-and-restore approach: snapshot the mutable
lists/dicts/sets on litellm and litellm.proxy.proxy_server once at conftest
import, then deep-copy that snapshot back before each test. Callback lists,
caches, router state, etc. still get reset between tests, but the expensive
import chain only runs once per worker.
Local measurement on test_proxy_utils.py: 188 tests in 3.50s (previously took
~15 minutes of CI wall time on a single worker).
Unit Tests: Proxy DB Operations / proxy-db (auth-checks, tests/proxy_unit_tests/test_auth_checks.py tests/proxy_unit_tests/test_user_api_key_auth.py, 20, 8) (push) Waiting to run
Unit Tests: Proxy DB Operations / proxy-db (remaining, tests/proxy_unit_tests --ignore=tests/proxy_unit_tests/test_key_generate_prisma.py --ignore=tests/proxy_unit_tests/test_auth_checks.py --ignore=tests/proxy_unit_tests/test_user_api_key_auth.py, 30, 8) (push) Waiting to run
- _owner_cache now opportunistically sweeps expired entries past
_OWNER_CACHE_SWEEP_THRESHOLD live entries. Previously sessions that never
came back piled up forever.
- flush_session_to_db strips session_id/router_name/model_name from the update
payload. Prisma rejects writes to @@id fields.
- record_turn no longer persists last_user_content / last_assistant_content /
tool_call_history / pending_tool_calls. Those are needed only in-memory for
the next turn's signal detection; writing user prompts and tool payloads to
the DB would store PII for every conversation.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
