We had two different, incompatible-with-each-other, and both
individually broken, partial implementations of resizing logic.
There's the original pre-etcd resize, and then the etcd resize,
and neither works, but there's conflicts between the ways they
don't work.
No attempt to fix this is likely to yield decent results, so
instead, we yank them both out entirely, so if we decide to
implement resizing (which we will) we won't be confused by
stray code pertaining to resizing that's not really hooked
up to anything.
We're leaving the resize messages in protobuf to avoid renumbering
protobuf messages. We rename some of our message types to UNUSED0,
etcetera, so that any code still using the old names won't
compile, to make sure we get rid of it, but we can't just drop
the numbers without breaking rolling restart.
The Resize_AddNode tests are removed not just because we don't
have resizing, but because they were completely broken anyway
and never worked at all. But there's no reason to fix them because
they exist to fix the functionality we didn't have and are now
removing the vestigial remains of.
We also drop the one usage of the AddNode function of Noder, because
it was used only by one test code fragment that was creatincg clusters,
and that can be done more correctly. There were no other call sites
at all.
We mark the monitorAntiEntropy function to be ignored by
code coverage because it's not actually being covered. There's
a separate ticket for removing that entirely.
* Revert "make pql.Decimal.Value a private big.Int field"
This reverts commit eab6174388.
* Revert "pql.Decimal for DecimalVal in ValCount&GroupCount"
This reverts commit a0c9eec410.
* Revert "Add AddDecimal support to pql"
This reverts commit 50787fd37a.
This ensures that we can't overflow when adding `pql.Decimal`s together. The
only place we can possibly overflow is when converting pql.Decimal to an Int64,
but that is a risk we have to take. Also, the only place we do this is in our
ToRowser. We could maybe change that to strings, so the presentation of data
doesn't indicate an overflow, but that is a later decision to make. It will
also involve fixing the generate-proto-grpc make command, because that's broken
rn.
MacOS's firewall complains about a previously unknown app trying to
listen for network connections whenever we run go test. That's because
we *are* listening for network connections on arbitrary interfaces, not
just on localhost as we probably intended. Fix that.
This commit effectively removes the API-level validation that was
blocking certain API methods when the cluster was in a particular state
(namely DOWN and DEGRADED). The thinking is that we shouldn't be
blocking these requests at the API level, but rather should let them
pass through and allow the fact that a node is ACTUALLY down dictate the
behavior.
With this change, two tests were modified. They were previously
expecting the error message from the API validation on DOWN, but now
they check for a "shard unavailable" error, which is what gets returned
for a particular query when the cluster is in an unhealthy state.
i used this script, a little clunky but it got the job done
```bash
for file in `find . -type f -print | grep '\.go'`; do
sed '1,/^\/\/ limitations under the License.$/d' $file > $file.tmp;
result=`cat $file.tmp`
if [[ result != "" ]]; then
gofmt $file.tmp &> /dev/null;
if [[ $? == 0 ]]; then
mv $file.tmp $file && gofmt -w $file;
else
rm $file.tmp;
fi
else
rm $file.tmp;
fi
done
```
The "just open the holder" subcommand doesn't work the way it used
to, because now that we rely on etcd to open a holder, trying to open
a holder without things set up just coredumps.
Step 1: Fix that.
Step 2: Also add a test that covers it so we don't get bitrotted again.
Step 3: Remove an unrelated stale comment that doesn't deserve its
own commit log, having to do with an option that no longer exists
which is no longer being set right under the comment saying we set it.
Underlying goal: Don't use the http client to send messages back to the
local host. Also, when sending data to other nodes, don't collate it
from an ImportRequest into a completely different format, then immediately
collate that back into an ImportRequest. This does require changing
the logic over in ctl/import to make it create an ImportRequest.
Also, add additional testing to make sure we're actually trying anything
at all with several combinations (such as submitting import requests
which don't match the configuration of index or field), and improve
test coverage for that.
This introduces the ability to tell an http/client InternalClient about
a specific API that it should use for local queries where applicable.
That's not implemented outside of the import stuff, but should probably
be applied eventually to other things that are trying to talk to many
nodes one of which may be the local node. That behavior is contingent
on passing in a Qcx, because it is implicitly tied to an existing
execution context, and it can't assume that it can create a new one,
because that could deadlock.
Attributes are unmaintained and unused.
They have become more of a liability than a benefit.
This change eliminates them from the codebase.
The only user-visible change (assuming that attrs are not used) is that the attrs field will no longer appear in row JSON.
A while back we started just polling the reported cluster state of one node
when starting a cluster for tests. This works fine if we're doing fresh
new etcd queries for every single operation -- but that's insanely
expensive, it turns out.
When we use the watcher, some nodes will report stale data for "a
while", where "a while" appears to be easily a couple dozen milliseconds.
This is probably irrelevant in most real-world cases, because the common
case (detecting a node going down) means that we have at least five
seconds after a node goes down before etcd notices the lease expiring,
and a few milliseconds more or less won't matter.
But we have tests that assume either that node 0 is always the
coordinator (wrong) or that waiting for node 0 to think the cluster
is up means that every node in the cluster thinks the cluster is up,
or at least that it means that the coordinator thinks the cluster is
up. We retried later operations but not the initial ones against
the coordinator.
In fact, we probably want to wait for the entire cluster to think
it's up before we start trying things on clusters.
We also replace the "CheckClusterState" function with the existing
AwaitState call, or a new AssertState which errors out since that's
the way we usually use AwaitState anyway.
In the AwaitPrimaryState function, which used to be
AwaitCoordinatorState in a different long-lost revision, we have
to delay until a primary node is available, or fail if one does
not become available, to avoid a panic. This probably shouldn't
happen anymore, because of the last change:
Also, rovide dummy topology.Node entries before metadata is read.
During initial startup, we want to be able to do things like determine
which node is the primary, even before we've read metadata from them.
To do this, we populate the node list with dummy entries that just have
the ID (the only part we need to sort our list), and a node state of
UNKNOWN.
This breaks the fancy logic for determining whether or not to update
the node data, because the initial status of UNKNOWN matches what we
get from SetMetadata giving us new data so we end up not realizing
that this was actually a meaningful change. But actually, that's
a pretty niche optimization; we usually only get state changes when
there's an actual change in state. The updates here are cheap
and only happen after a write (or on the first query) so it's not
worth making the logic a lot fancier to make it work, when we can
just do the simple thing and update any time the dirty flag is set.
We also standardize on a 50ms delay, because 1ms delays were
really expensive when each check was hitting etcd multiple times,
and 50ms is Usually Long Enough.
This gives more consistency with the other tests and allows us to get audit
checks on the server/ tests. The tests on the clients being closed are
temporarily disabled because they tend to think the last test's clients
are "still open" for a few seconds after the test completes.
Long story short: Once we create a server and start it, we can't start
it again. We can't close it and restart it, and we can't just start
it without closing it.
Unfortunately, if the server's config needs to change, we have a Problem
here.
This ultimately means that the retry logic for GetListeners can't actually
retry successfully; if we fail on the first attempt, we necessarily fail
on any later attempts also, and if we try to fix that, we get panics.
But!
We don't actually NEED to retry. We just need to ensure that we can
open a :0 port, extract the actual port number, and use that in places
where the port number mattered, without having to rebind it.
The only actual place we needed to rebind things was opening gRPC
servers, so we introduce a gRPC Listener that can be used instead of
trying to bind to a specified port.
In a bunch of other cases where we had similar logic to try to allocate
and then use a port, we can switch to just using a provided listener.
For instance, net/http has `Serve(net.Listener, handler)`, not just
ListenAndServe(addr, handler).
This should eliminate the weird CI failures from eaddrinuse.
NOT fixed: server/cluster_test.go/TestClusterResize_AddNode isn't working
right now. The new node isn't actually being added to the existing cluster.
I attempted this but was outsmarted by it, and I think fixing the
rest of this is worth it as a separate thing.
We want to distinguish different *kinds* of GroupCounts, so we're
making the GroupCounts parent object track its type so we can keep that
correct.
Adding this to protobuf, etc, then creates some weird behaviors
because sometimes we expect []GroupCount, and sometimes we expect
*GroupCounts. This implies changes to test cases. Also, the
changes to test cases imply that some test cases are probably now
wrong; for instance, they're expecting a "sum" column, equal to zero,
when no sum was requested.
We try to make the encoder handle a []*GroupCount gotten from another
node without panicing, and avoid breaking the semantics of the existing
messages, renumbering messages or components, etc.
Since a previous version, the `.Groups` member has been privatized,
and the `.Get()` convenience accessor has been renamed `.Groups()`
and is now used consistently in a way that should reduce the risk
of nil pointers causing crashes. Also, NewGroupCounts is used in
a couple more places.
port mapper gives out ports from 63000-65000 for the tests
fix another race
http test uses port.MustGetPort
rbf: remove :0 port request
ocd happy
test fix for grpc listener address already in use
test/disco allocates BindGRPC port from the port mapper
dump stack on each GetPort
verify each port is usable right away
server/config.go has Config.Validate() now
panic if gossip port is 0. validate server.Config
fix another gossip port 0
builds
quiet, don't dump stack on each port alloc
builds
happy linter
even gossip fallback should not be zero but rather use the port mapper
- the -fix flag repairs replication errors by copying from the primary.
- the -fixkeys flag repairs any string key translation issues.
- make pilosa-fsck installs pilosa-fsck and builds release-pilosa-fsck.COMMIT.GOOS.tar.gz release tarbar
- introduce Query Context (Qcx) for managing database-per-shard.
- replaces the MultiTx, so mtx.go is retired and removed.
- introduces the HolderConfig struct and all Holders now have
a path from birth.
- rbf speedups on bitwise writes
- badgerdb is removed due to unresolvable write conflicts.
fixes#703#676
The testhook/ package provides an easy way to set up multiple
hooks to run before/after tests are run.
The audit hooks track open and closes of storage backends,
files, indexes, and holders, for example. A tempdir wrapper
creates temporary directories which are automatically cleaned up
when the test ends. Any kind of resource creation that
should be closed at test conclusion can be tracked. We
will complain at the end of the TestMain if resources are
leaking.
Leaks under go1.13:
We use a wrapper function which is a no-op for go 1.13, but actually
calls testing.TB.Cleanup in go1.14, so we can still build with 1.13 even though
tests will leak files all over the place there. Because of this,
don't run the testhook tests when using 1.13, as they'll always fail.
- the test/pilosa.go http client now times out after 10 seconds
to help diagnose hung server situations.
- Makefile targets added to get better progress reports.
Some cluster tests failed sporadically. In order to fix them, I
introduced some debugging-related functionality, which revealed
several new bugs that were actually existing bugs we just happened
not to hit in testing. This combines various fixes.
We start with "make the nodes used in testing have distinct names
based on the test case name", which lets us discover that we are
leaking clusters, which continue to sit around talking with each
other. That in turn causes significantly higher load on access to
ephemeral ports, which causes sporadic failures when we shut a
node down and try to restart it, but something else has gotten assigned
its ephemeral port number since then.
Part of the fix is to try to rebind on port 0 if an attempt to
bind to a specified port over 32k fails. This is a guess; the
actual ephemeral port range could be 16k+, 32k+, or 48k+, or just
about anything else really, but it seems reasonable in
practice.
There were bugs in the oft-repeated loops to await the cluster
achieving a given state, and it could hang forever if it didn't,
so we add a timeout and a standard function on the test.Cluster
type to handle that. Note that the timeout seems irrelevant; in
every case I've tried, a timeout of 0 is fine because the node
start doesn't complete until the cluster state has changed.
Add a method to test.Command to run a query, expecting a specific
result. Also clean up some of the formatting and generation of
queries, and allow parameterized (badly) queries. This lets us fix
a subtle bug, which is that test cases were depending on assumptions
about shardwidths. Also improve the diagnostic output from some of
these functions so test failures are more comprehensible.
But actually that dependency on shardwidths was ALSO revealing a
genuine underlying bug, which is that a node resize did not correctly
propagate the schema to a new node if there was no data present
on shards that node would own. We now also have a test case that
hits that (or would, if we hadn't fixed it).
Add comments explaining the server options parameters for MustNewCluster
and MustRunCluster.
Also, we implement the ReadFrom and WriteTo behaviors for
InMemTranslateStore, without which some of the cluster resize tests
fail. Props to the comment for specifically stating that they wouldn't
work if that happened, which probably saved me several hours of
debugging. The implementations may not be robust, but
InMemTranslateStore is intended to be used only in lightweight
and transient testing.
