mirror of
https://github.com/BerriAI/litellm.git
synced 2026-08-28 05:25:59 +00:00
Mirror of https://github.com/BerriAI/litellm.git
8177230a29
* feat(guardrails): add run_in_parallel opt-in for concurrent pre_call guardrails Pre-call guardrails run sequentially because each may mutate the request payload and later guardrails depend on earlier mutations. Deployments with several slow block-only pre_call guardrails (external moderation, Bedrock, LLM-judge) therefore pay the sum of their latencies. during_call guardrails run concurrently but alongside the LLM call, so a violating payload has already been sent, which is unacceptable when the request must never reach the model. This adds a per-guardrail run_in_parallel flag (default off). Guardrails that opt in are pulled out of the sequential loop and run concurrently via asyncio.gather after every sequential (payload-mutating) guardrail has run, so they observe the mutated payload and still form a hard barrier before the LLM call; the first to raise blocks the request. Their returned data is discarded since they are declared block-only. The flag is wired from LitellmParams onto the guardrail instance at the same generic choke point in initialize_guardrail that already sets skip_system_message_in_guardrail, so no per-provider initializer needs to change. * feat(guardrails): extend run_in_parallel opt-in to post_call guardrails post_call_success_hook ran guardrails sequentially for the same reason pre_call did: response-modifying guardrails thread the response forward. But block-only output scanners (which read the response and reject on violation without changing it) serialize for no benefit and add latency. This reuses the existing run_in_parallel flag for the post_call hook. Opted-in post_call guardrails are pulled out of the sequential loop and run concurrently via asyncio.gather after the sequential (response-modifying) guardrails and before the non-guardrail CustomLogger callbacks, so they inspect the final response and still block it from reaching the client if any raises. Their returned response is discarded since they are block-only. The apply_guardrail path sets data["guardrail_to_apply"] immediately before awaiting, and unified_guardrail pops it before its first suspension point, so concurrent guardrails never race on that key under asyncio's cooperative scheduling. * fix(guardrails): await all parallel guardrails and prioritize blocks over reroutes Addresses review feedback on the run_in_parallel opt-in. asyncio.gather propagated the first exception without cancelling or awaiting the siblings, so a block at t=0 left the other guardrails running as unobserved background tasks (wasted external calls plus event-loop warnings), and a fast SensitiveDataRouteException/ModifyResponseException could return a reroute or passthrough before a slower block finished, letting crafted input bypass the block. Both the pre_call and post_call parallel batches now gather with return_exceptions=True so every guardrail runs to completion, then raise any blocking exception ahead of a flow-changing one. The registry choke point wrote bool(None)==False onto every instance when the config omitted run_in_parallel, silently disabling a constructor-set default; it now only writes when the config provides an explicit value. * fix(guardrails): record lifecycle logs for every concurrently-run guardrail The log_guardrail_information decorator skipped its auto-record when it saw that the count of standard_logging_guardrail_information entries in the shared request_data had grown during the wrapped call, taking that as proof the wrapped function had recorded its own richer entry. That heuristic breaks the moment guardrails run concurrently (parallel pre_call/post_call, during_call): a sibling guardrail's append inflates the shared count, so a guardrail that did not self-record wrongly concludes it already did and drops its own entry. The result is that enabling run_in_parallel silently loses per-guardrail lifecycle logs, so the Admin UI Request Lifecycle timeline and downstream loggers (Datadog, Langfuse, OTEL, spend logs) show only one of the concurrent guardrails. Replace the shared-count heuristic with a ContextVar flag set when a guardrail records its own entry. asyncio copies the context into each gathered task, so the flag is isolated per concurrent guardrail while still catching the self-record-then-skip-auto-record case within a single invocation. * test(guardrails): declare run_in_parallel on post_call guardrail mocks The post_call partition reads run_in_parallel on every CustomGuardrail callback. A MagicMock(spec=CustomGuardrail) has no run_in_parallel (it is set in __init__, not on the class) so the attribute access raised, and even a class-level default would return a truthy child mock that wrongly routes the double into the parallel batch. Declare the flag False on the shared mock factories so these pre-existing hook tests exercise the sequential path they assert on. * fix(guardrails): harden run_in_parallel reads and address review feedback Read run_in_parallel via getattr(..., False) in the pre_call and post_call partitions so a third-party CustomGuardrail subclass that overrides __init__ without chaining super().__init__() no longer raises AttributeError on a path that previously worked. Drop the redundant in-function GuardrailEventHooks import in _run_parallel_post_call_guardrails (already imported module-level). Remove the flaky wall-clock upper-bound assertions from the two concurrency tests; the all-start-before-any-end overlap assertion is the timing-independent signal that actually proves concurrency. |
||
|---|---|---|
| .cargo | ||
| .circleci | ||
| .devcontainer | ||
| .githooks | ||
| .github | ||
| .semgrep/rules | ||
| backend | ||
| ci_cd | ||
| cookbook | ||
| db_scripts | ||
| docker | ||
| enterprise | ||
| examples | ||
| gateway | ||
| helm | ||
| litellm | ||
| litellm-proxy-extras | ||
| litellm-rust | ||
| migrations | ||
| packaging/homebrew | ||
| scripts | ||
| terraform | ||
| tests | ||
| ui | ||
| .dockerignore | ||
| .env.example | ||
| .flake8 | ||
| .git-blame-ignore-revs | ||
| .gitattributes | ||
| .gitguardian.yaml | ||
| .gitignore | ||
| .npmrc | ||
| AGENTS.md | ||
| ARCHITECTURE.md | ||
| basedpyright-code-budget.json | ||
| CLAUDE.md | ||
| codecov.yaml | ||
| CONTRIBUTING.md | ||
| cosign.pub | ||
| docker-compose.hardened.yml | ||
| docker-compose.yml | ||
| Dockerfile | ||
| GEMINI.md | ||
| LICENSE | ||
| license_cache.json | ||
| Makefile | ||
| mcp_servers.json | ||
| model_prices_and_context_window.json | ||
| osv-scanner.toml | ||
| package-lock.json | ||
| package.json | ||
| policy_templates.json | ||
| prometheus.yml | ||
| provider_endpoints_support.json | ||
| proxy_server_config.yaml | ||
| pyproject.toml | ||
| pyrightconfig.json | ||
| qa_sticky_session.sh | ||
| README.md | ||
| render.yaml | ||
| router_plugins.json | ||
| ruff-strict-budget.json | ||
| ruff-strict.toml | ||
| ruff.toml | ||
| schema.prisma | ||
| security.md | ||
| taplo.toml | ||
| type-discipline-budget.json | ||
| uv.lock | ||
🚅 LiteLLM
LiteLLM AI Gateway
Open Source AI Gateway for 100+ LLMs. Self-hosted. Enterprise-ready. Call any LLM in OpenAI format.
LiteLLM Proxy Server (AI Gateway) | Hosted Proxy | Enterprise Tier | Website
What is LiteLLM
LiteLLM is an open source AI Gateway that gives you a single, unified interface to call 100+ LLM providers — OpenAI, Anthropic, Gemini, Bedrock, Azure, and more — using the OpenAI format.
Use it as a Python SDK for direct library integration, or deploy the AI Gateway (Proxy Server) as a centralized service for your team or organization.
Jump to LiteLLM Proxy (LLM Gateway) Docs
Jump to Supported LLM Providers
Why LiteLLM
Managing LLM calls across providers gets complicated fast — different SDKs, auth patterns, request formats, and error types for every model. LiteLLM removes that friction:
- Unified API — one interface for 100+ LLMs, no provider-specific SDK juggling
- Drop-in OpenAI compatibility — swap providers without rewriting your code
- Production-ready gateway — virtual keys, spend tracking, guardrails, load balancing, and an admin dashboard out of the box
- 8ms P95 latency at 1k RPS (benchmarks)
OSS Adopters
Netflix |
Features
LLMs - Call 100+ LLMs (Python SDK + AI Gateway)
All Supported Endpoints - /chat/completions, /responses, /embeddings, /images, /audio, /batches, /rerank, /a2a, /messages and more.
Python SDK
uv add litellm
from litellm import completion
import os
os.environ["OPENAI_API_KEY"] = "your-openai-key"
os.environ["ANTHROPIC_API_KEY"] = "your-anthropic-key"
# OpenAI
response = completion(model="openai/gpt-4o", messages=[{"role": "user", "content": "Hello!"}])
# Anthropic
response = completion(model="anthropic/claude-sonnet-4-20250514", messages=[{"role": "user", "content": "Hello!"}])
AI Gateway (Proxy Server)
Getting Started - E2E Tutorial - Setup virtual keys, make your first request
uv tool install 'litellm[proxy]'
litellm --model gpt-4o
import openai
client = openai.OpenAI(api_key="anything", base_url="http://0.0.0.0:4000")
response = client.chat.completions.create(
model="gpt-4o",
messages=[{"role": "user", "content": "Hello!"}]
)
Agents - Invoke A2A Agents (Python SDK + AI Gateway)
Supported Providers - LangGraph, Vertex AI Agent Engine, Azure AI Foundry, Bedrock AgentCore, Pydantic AI
Python SDK - A2A Protocol
from litellm.a2a_protocol import A2AClient
from a2a.types import SendMessageRequest, MessageSendParams
from uuid import uuid4
client = A2AClient(base_url="http://localhost:10001")
request = SendMessageRequest(
id=str(uuid4()),
params=MessageSendParams(
message={
"role": "user",
"parts": [{"kind": "text", "text": "Hello!"}],
"messageId": uuid4().hex,
}
)
)
response = await client.send_message(request)
AI Gateway (Proxy Server)
Step 1. Add your Agent to the AI Gateway — set protocolVersion to 1.0 or 0.3 per agent
Step 2. Call Agent via A2A SDK (requires a2a-sdk>=1.1.0)
import httpx
from a2a.client import A2ACardResolver, ClientConfig, ClientFactory
from a2a.types import Message, Part, Role, SendMessageRequest
from a2a.utils.constants import TransportProtocol
from uuid import uuid4
base_url = "http://localhost:4000/a2a/my-agent" # LiteLLM proxy + agent name
headers = {"Authorization": "Bearer sk-1234"} # LiteLLM Virtual Key
async with httpx.AsyncClient(headers=headers, timeout=60.0) as http_client:
resolver = A2ACardResolver(httpx_client=http_client, base_url=base_url)
agent_card = await resolver.get_agent_card()
config = ClientConfig(
httpx_client=http_client,
streaming=False,
supported_protocol_bindings=[TransportProtocol.JSONRPC, TransportProtocol.HTTP_JSON],
)
client = ClientFactory(config).create(agent_card)
request = SendMessageRequest(
message=Message(
message_id=uuid4().hex,
role=Role.ROLE_USER,
parts=[Part(text="Hello!")],
)
)
async for event in client.send_message(request):
populated = event.ListFields()
if populated and populated[0][0].name in ("message", "msg"):
print("".join(getattr(p, "text", "") or "" for p in populated[0][1].parts))
MCP Tools - Connect MCP servers to any LLM (Python SDK + AI Gateway)
Python SDK - MCP Bridge
from mcp import ClientSession, StdioServerParameters
from mcp.client.stdio import stdio_client
from litellm import experimental_mcp_client
import litellm
server_params = StdioServerParameters(command="python", args=["mcp_server.py"])
async with stdio_client(server_params) as (read, write):
async with ClientSession(read, write) as session:
await session.initialize()
# Load MCP tools in OpenAI format
tools = await experimental_mcp_client.load_mcp_tools(session=session, format="openai")
# Use with any LiteLLM model
response = await litellm.acompletion(
model="gpt-4o",
messages=[{"role": "user", "content": "What's 3 + 5?"}],
tools=tools
)
AI Gateway - MCP Gateway
Step 1. Add your MCP Server to the AI Gateway
Step 2. Call MCP tools via /chat/completions
curl -X POST 'http://0.0.0.0:4000/v1/chat/completions' \
-H 'Authorization: Bearer sk-1234' \
-H 'Content-Type: application/json' \
-d '{
"model": "gpt-4o",
"messages": [{"role": "user", "content": "Summarize the latest open PR"}],
"tools": [{
"type": "mcp",
"server_url": "litellm_proxy/mcp/github",
"server_label": "github_mcp",
"require_approval": "never"
}]
}'
Use with Cursor IDE
{
"mcpServers": {
"LiteLLM": {
"url": "http://localhost:4000/mcp/",
"headers": {
"x-litellm-api-key": "Bearer sk-1234"
}
}
}
}
Supported Providers (Website Supported Models | Docs)
Get Started
You can use LiteLLM through either the Proxy Server or Python SDK. Both give you a unified interface to access multiple LLMs (100+ LLMs). Choose the option that best fits your needs:
| LiteLLM AI Gateway | LiteLLM Python SDK | |
|---|---|---|
| Use Case | Central service (LLM Gateway) to access multiple LLMs | Use LiteLLM directly in your Python code |
| Who Uses It? | Gen AI Enablement / ML Platform Teams | Developers building LLM projects |
| Key Features | Centralized API gateway with authentication and authorization, multi-tenant cost tracking and spend management per project/user, per-project customization (logging, guardrails, caching), virtual keys for secure access control, admin dashboard UI for monitoring and management | Direct Python library integration in your codebase, Router with retry/fallback logic across multiple deployments (e.g. Azure/OpenAI) - Router, application-level load balancing and cost tracking, exception handling with OpenAI-compatible errors, observability callbacks (Lunary, MLflow, Langfuse, etc.) |
Stable Release: Use docker images with the -stable tag. These have undergone 12 hour load tests, before being published. More information about the release cycle here
Support for more providers. Missing a provider or LLM Platform, raise a feature request.
Deploy on AWS or GCP with Terraform
Run the LiteLLM proxy as a production-ready componentized stack (gateway, backend, UI on separate services; managed Postgres + Redis + object store) using the published Terraform modules. Both modules are on the public Terraform Registry — no auth needed.
AWS — ECS Fargate + Aurora + ElastiCache + ALB
git clone https://github.com/BerriAI/litellm.git
cd litellm/terraform/litellm/aws/examples/default
cp terraform.tfvars.example terraform.tfvars # edit region/tenant/env
terraform init && terraform apply
Or call the module from your own root config:
# main.tf
terraform {
required_version = ">= 1.6.0"
required_providers {
aws = { source = "hashicorp/aws", version = "~> 5.60" }
}
}
provider "aws" {
region = "us-west-2"
}
module "litellm" {
source = "BerriAI/litellm/aws"
version = "~> 1.89"
region = "us-west-2"
azs = ["us-west-2a", "us-west-2b"]
tenant = "acme"
env = "prod"
# Production: provide an ACM cert. Without one, set allow_plaintext_alb = true
# (dev/trial only).
# acm_certificate_arn = "arn:aws:acm:us-west-2:111122223333:certificate/..."
allow_plaintext_alb = true
}
output "litellm_url" {
value = module.litellm.alb_dns_name
}
terraform init
terraform apply
Provider API keys live in AWS Secrets Manager; reference ARNs via gateway_extra_secrets. Full input list and architecture diagram on the registry page.
GCP — Cloud Run + Cloud SQL + Memorystore + HTTPS LB
Real 1-click. Opens Cloud Shell, clones this repo, and walks you through terraform apply via a built-in DeployStack tutorial — pick the project, the tutorial sets up the Artifact Registry remote repo, writes terraform.tfvars from your answers, and runs apply.
To call the module from your own config instead, Cloud Run can't pull from ghcr.io directly, so first set up a one-time Artifact Registry remote repo backed by GHCR:
gcloud artifacts repositories create litellm \
--location=us-central1 \
--repository-format=docker \
--mode=remote-repository \
--remote-docker-repo=https://ghcr.io \
--project=my-gcp-project
Then:
# main.tf
terraform {
required_version = ">= 1.6.0"
required_providers {
google = { source = "hashicorp/google", version = "~> 6.10" }
google-beta = { source = "hashicorp/google-beta", version = "~> 6.10" }
}
}
provider "google" { project = "my-gcp-project"; region = "us-central1" }
provider "google-beta" { project = "my-gcp-project"; region = "us-central1" }
module "litellm" {
source = "BerriAI/litellm/google"
version = "~> 1.89"
project_id = "my-gcp-project"
region = "us-central1"
tenant = "acme"
env = "prod"
# Replace my-gcp-project with your GCP project ID (same value as project_id above).
image_registry = "us-central1-docker.pkg.dev/my-gcp-project/litellm/berriai"
# Production: provide DNS already pointing at the LB IP for Google-managed certs.
# Without one, set allow_plaintext_lb = true (dev/trial only).
# lb_domains = ["proxy.example.com"]
allow_plaintext_lb = true
}
output "litellm_url" {
value = module.litellm.load_balancer_url
}
terraform init
terraform apply
Provider API keys live in Secret Manager; reference resource IDs (e.g. projects/my-gcp-project/secrets/openai-api-key) via gateway_extra_secrets. Full input list and architecture diagram on the registry page.
Both stacks include
- The full componentized split (gateway / backend / UI as independent services)
- Managed Postgres (writer + reader) and Redis
- Versioned object store for proxy state + file uploads
- An auto-generated
LITELLM_MASTER_KEYin your cloud's secret manager - A one-off migration job that runs
prisma migrate deploybefore the proxy starts - The same
proxy_configsurface as the Helm chart — pass YAML as a typed map
The Terraform modules live at terraform/litellm/aws/ and terraform/litellm/gcp/ in this repo; the registry entries are read-only mirrors updated on each release.
Run in Developer Mode
Services
- Setup .env file in root
- Run dependent services
docker-compose up db prometheus
Backend
- Run
make bootstrap - Start proxy backend:
uv run python litellm/proxy/proxy_cli.py
Frontend
- Navigate to
ui/litellm-dashboard(dependencies were already installed w/make bootstrap) - Start dashboard:
npm run dev
Verify Docker Image Signatures
All LiteLLM Docker images published to GHCR are signed with cosign. Every release is signed with the same key introduced in commit 0112e53.
Verify using the pinned commit hash (recommended):
A commit hash is cryptographically immutable, so this is the strongest way to ensure you are using the original signing key:
cosign verify \
--key https://raw.githubusercontent.com/BerriAI/litellm/0112e53046018d726492c814b3644b7d376029d0/cosign.pub \
ghcr.io/berriai/litellm:<release-tag>
Verify using a release tag (convenience):
Tags are protected in this repository and resolve to the same key. This option is easier to read but relies on tag protection rules:
cosign verify \
--key https://raw.githubusercontent.com/BerriAI/litellm/<release-tag>/cosign.pub \
ghcr.io/berriai/litellm:<release-tag>
Replace <release-tag> with the version you are deploying (e.g. v1.83.0-stable).
Enterprise
For companies that need better security, user management and professional support
Get an Enterprise License Talk to founders
This covers:
- ✅ Features under the LiteLLM Commercial License:
- ✅ Feature Prioritization
- ✅ Custom Integrations
- ✅ Professional Support - Dedicated discord + slack
- ✅ Custom SLAs
- ✅ Secure access with Single Sign-On
Contributing
We welcome contributions to LiteLLM! Whether you're fixing bugs, adding features, or improving documentation, we appreciate your help.
Quick Start for Contributors
This requires uv to be installed.
git clone https://github.com/BerriAI/litellm.git
cd litellm
make install-dev # Install development dependencies
make format # Format your code
make lint # Run all linting checks
make test-unit # Run unit tests
make format-check # Check formatting only
For detailed contributing guidelines, see CONTRIBUTING.md.
📖 Contributing to documentation? The LiteLLM docs have moved to a separate repository: BerriAI/litellm-docs. Please open doc PRs there. Docs are served at docs.litellm.ai.
Code Quality / Linting
LiteLLM follows the Google Python Style Guide.
Our automated checks include:
- Black for code formatting
- Ruff for linting and code quality
- MyPy for type checking
- Circular import detection
- Import safety checks
All these checks must pass before your PR can be merged.
Support / talk with founders
- Schedule Demo 👋
- Community Discord 💭
- Community Slack 💭
- Our emails ✉️ ishaan@berri.ai / krrish@berri.ai