i used this script, a little clunky but it got the job done
```bash
for file in `find . -type f -print | grep '\.go'`; do
sed '1,/^\/\/ limitations under the License.$/d' $file > $file.tmp;
result=`cat $file.tmp`
if [[ result != "" ]]; then
gofmt $file.tmp &> /dev/null;
if [[ $? == 0 ]]; then
mv $file.tmp $file && gofmt -w $file;
else
rm $file.tmp;
fi
else
rm $file.tmp;
fi
done
```
Performance of tests on MacOS has been atrocious for a while, and
a lot of that is fsync, so we're trying to make that optional.
To test all of this, I modified RBF to panic if anything tried to
open an RBF database without disabling fsync, and ran the tests that
way, and tracked down the various places this could still happen.
There's a lot of places in our tree where we were creating
test holders which were not getting created with fsync disabled, which
results in a surprisingly large number of points at which we end
up calling fsync in tests, which makes tests much slower than they
need to be. There's also a bunch of places where the flags don't get
propagated correctly; for instance, storage.fsync didn't propagate
to the RBFConfig.
We add an "fsync enabled" flag to OpenTranslateStoreFunc, so we can
tell translation stores that we don't need syncing, so the server's
config can be passed on appropriately.
More of the test code that sets things up is correctly configuring
that flag by default.
We also change the barely-used bolt storage backend to support this as
well.
With this done, the only calls to fsync left in a run of `go test -short`
in the top-level directory are from the zap logger in etcd, and consumed
around 0.03 seconds. The overall impact is that `go test -short`
went from "takes enough more than 10 minutes that i don't know how long
it takes" to about 2.5 minutes.
Attributes are unmaintained and unused.
They have become more of a liability than a benefit.
This change eliminates them from the codebase.
The only user-visible change (assuming that attrs are not used) is that the attrs field will no longer appear in row JSON.
port mapper gives out ports from 63000-65000 for the tests
fix another race
http test uses port.MustGetPort
rbf: remove :0 port request
ocd happy
test fix for grpc listener address already in use
test/disco allocates BindGRPC port from the port mapper
dump stack on each GetPort
verify each port is usable right away
server/config.go has Config.Validate() now
panic if gossip port is 0. validate server.Config
fix another gossip port 0
builds
quiet, don't dump stack on each port alloc
builds
happy linter
even gossip fallback should not be zero but rather use the port mapper
- blue_green for doing migration. Called before Holder.Open finishes.
- holdbkg.go added for index lookup. Less wedging between a deadlock and a race.
- fix fault under read-only map under lmdb at
TestExecutor_Execute_Row_Range/RowIDColumnID by doing cow in roaring.
- roaring -tags gofuzz builds again
- roaringparanoia build tag added to make test targets in Makefile
- add rbf.NewDBWithAllocZero for out-of-bounds memory checks
- .circleci/config.yml test-shardwidth-22 with large run container, kept OOM-ing we suspect.
Fixes#819
- introduce Query Context (Qcx) for managing database-per-shard.
- replaces the MultiTx, so mtx.go is retired and removed.
- introduces the HolderConfig struct and all Holders now have
a path from birth.
- rbf speedups on bitwise writes
- badgerdb is removed due to unresolvable write conflicts.
fixes#703#676
The testhook/ package provides an easy way to set up multiple
hooks to run before/after tests are run.
The audit hooks track open and closes of storage backends,
files, indexes, and holders, for example. A tempdir wrapper
creates temporary directories which are automatically cleaned up
when the test ends. Any kind of resource creation that
should be closed at test conclusion can be tracked. We
will complain at the end of the TestMain if resources are
leaking.
Leaks under go1.13:
We use a wrapper function which is a no-op for go 1.13, but actually
calls testing.TB.Cleanup in go1.14, so we can still build with 1.13 even though
tests will leak files all over the place there. Because of this,
don't run the testhook tests when using 1.13, as they'll always fail.
- the test/pilosa.go http client now times out after 10 seconds
to help diagnose hung server situations.
- Makefile targets added to get better progress reports.
- rbf had races around the new rootRecords cache in tx
- rbf tx needed a write lock on the db now that rootRecords are written
- added a global registry for rbfDB to correctly dedup instances
- implement DeleteFragment, DeleteIndex for rbf
- use badger style keys for rbf to allow content checksumming to be list
containers in the same order
- lots of other integration of rbf into pilosa layer.
back to github.com/dgraph-io/badger/v2 v2.0.1-rc1.0.20200709123515-8e896a7af361 b/c github.com/dgraph-io/badger/v2 v2.0.1-rc1.0.20200718033852-37ee16d8ad1c had issues with CI on 386 and arm
a) All tests green under -race for both PILOSA_TXSRC=roaring and PILOSA_TXSRC=badger.
b) Distinct is merged back into mainline pilosa.
Seebs notes on the Distinct work:
merge Distinct plugin back into main source tree, convert to Tx
We drop all references to the Preemptively Deprecated Don't You Dare
Use This extension interface, and move the one and only extension we had
(Distinct) into the main executor.
Also this fixes an arguable bug, which is that Container.AsBitmap()
would panic on a nil parameter, but it should have returned an empty
bitmap, because a nil *Ccontainer is a valid empty container. This
simplifies logic significantly in Distinct.
Fixes#569#570#571#572#573#584#585
- all tests green on RoaringTx
- RoaringTx on by default
- blueGreenTx testing framework available for A-vs-B comparison
of Tx implementations
- flag -tx added to server command line but not wired to
change NewIndex() selection yet.
- 918 green tests, 14 tests red on BadgerTx.
A full list of the 14 red tests on BadgerTx follows.
Note that these red tests represent not defects in BadgerDB
or BadgerTx but rather failures of the pre-existing pilosa infrastructure to yet
be fully adapted from files to using a transactional storage engine.
As such these are tests that RBF should not be expected to
pass yet either.
Fixing the pilosa infrastructure to allow these tests
to go green under Badger is the next and highest priority
order of business, but RBF can get much testing benefit
from the 918 green tests we do have, and hence we merge
as much as we have today.
The 14 red tests when NewIndex() is set to use
BadgerTx are as follows. Note in particular
that pilosa cluster resizing is not working yet under a
transactional store.
TestCluster_ResizeStates/Multiple_nodes,_with_data
TestImportClearRestart/0MaxOpN10000
TestImportClearRestart/1MaxOpN10000
TestImportClearRestart/2MaxOpN10000
TestImportClearRestart/3MaxOpN10000
TestExecutor_Execute_Existence/Row
TestExecutor_ForeignIndex
TestExecutor_Execute_CountDistinct/Distinct
TestExecutor_Execute_CountDistinct/Count(Distinct)
TestExecutor_Execute_CountDistinct/GroupBy(Distinct)
TestExecutor_BareDistinct
TestExecutor_Execute_TopNDistinct/TopN
TestHolderSyncer_IntField/BasicSync
TestHolderSyncer_IntField/MultiShard
In the case where a block merge needed to occur
on a replica containing a row on the edge of the block,
the existing logic would inadvertently clear the first
row in the next block. This PR fixes that.
This PR adds support for anti-entropy syncing for integer
and decimal fields. It differs from the logic for other
field types in that it does not rely on a consensus to determine
what the value should be; instead, it considers the correct
values to be those of the primary replica. From there, data
is pushed to all non-primary replicas.
In the case where a field with a foreign index opens before the
foreign index has opened (and is available as a reference in the
holder), push the field into a queue to have its foreign index
applied once all indexes have opened.
This code represents an attempt at providing reliable tracking
of whether any bitmaps still in use have access to a given block
of mmapped data, allowing us to unmap the data when nothing is using
it anymore.
The basic approach is as follows: Each mmap is associated with
a new object, called a "generation". A generation reflects
a particular instance of a given file being mapped. When a
bitmap is built from an mmapped data source, the bitmap is
given a pointer to the generation as its Source. When bitmap
operations combine containers from other bitmaps, they
produce new bitmaps that are tagged with the combined set of
sources.
When we snapshot a file, or for some other reason wish to remap
it, the corresponding bitmap has all its containers updated to
use the new storage, and the bitmap's source is changed. However,
previously-handed-out containers might still have references to the
old storage. Those containers would be in bitmaps with the old
source.
After a bunch of study of trying to reference-count and track
this, I realized: We don't actually need to do that, because we
already have something suitable for determining whether anything
can reach a given object. It's the garbage collector.
So we set a finalizer on the generation object, which handles
unmapping. There's additional sanity-checks here to confirm things
like "we thought this generation should be expiring", and we
track timestamps. We could also have things check whether a
given bitmap's source was marked as obsolete "a while ago", but
that isn't implemented yet.
There's a debug version of this which tracks finalization, creation,
and ending timestamps, and has a call to provide diagnostics for
this. Identical generation IDs get separated out with random
suffixes in this case -- there's sometimes a second or third
instance of the same name due to a holder closing and reopening,
but this basically only happens in testing.
Note that generations are still used even when there's no mmapping,
but unless debugging is turned on, they shouldn't propagate much --
we don't consider a generation to be the source of a bitmap unless
the bitmap actually mapped things from that generation's mmapped
storage, or debugging is on.
There's a couple of other, possibly more subtle, changes and
bug fixes that got caught by the testing on this:
* If a fragment is partially opened and then opening some later
part fails, we close the earlier parts before returning the
error so we aren't leaving it partially open.
* Several operations on segments which were requesting that a
frozen copy of a bitmap be created are now actually *replacing*
their bitmap with the frozen bitmap, rather than discarding it.
* intersectRunRun, if it decides to create an array or bitmap,
will yield that container instead of discarding it.
And why all of this? Why, so we can actually implement the thing
where when a fragment has a valid roaring bitmap, but the ops log
is corrupt, we can truncate the corrupt part of the ops log and
reopen it. Which I did.
When the generationdebug build tag is in use, every generation
has a finalizer all the time. When it's not, they only get finalizers
when we expect them to be done -- say, when closing a fragment.
This is because finalizers appear to be possibly-expensive.
There's some logical cleanup to openStorage here, dividing part
of its work into applyStorage and importStorage, which have a common
case for handling "there's no data in this file".
So with the switch to a new linter, we get a lot of new warnings,
and the majority of them are harmless probably, but a few might be
real. Variously just use _ to suppress warnings, or report errors.
There's probably things here that deserve better fixes, but we can
always revisit it.
The http internal client's FragmentBlocks and Blockdata methods were being used
incorrectly, and incorrect respectively. One was not being passed a node URI by
monitorAntiEntropy, and the other was always using the defaultURI regardless of
what was passed to it. Antientropy was doubling not working because of this. I
think this crept in pretty recently, so hasn't actually affected anyone.
I exposed a SyncData method on Server so that we can invoke the anti entropy
task manually instead of trying to set up the interval so that it will run and
then sleeping and waiting for it to run. Now that this test works the way it
does, the other anti entropy test is obsolete, and I deleted it.
