- Previously, on timequantum schemas, we would
create and open a view for the cartesian
product of every possible view and shard.
- This caused us to be very slow on re-open,
and to use lots of memory for views that
held nothing.
- This change makes startup faster, memory
use much lower, and should speed migration.
The "needs snapshot queue" check was broken, as it only checked inside a loop over indices.
If there are no indexes yet (or more likely if the indices have not yet been loaded off of disk), then this would never use the snapshot queue on roaring.
- the -fix flag repairs replication errors by copying from the primary.
- the -fixkeys flag repairs any string key translation issues.
- make pilosa-fsck installs pilosa-fsck and builds release-pilosa-fsck.COMMIT.GOOS.tar.gz release tarbar
Previously, we never waited for translation sync goroutines to stop.
That issue should be mostly harmless in the normal path.
Additionally, this waits for the translation sync to shut down when stopping the server.
This is no longer necessary, as caches now recalculate on read.
Also, in general a user will not explicitly request recalculation, so it would make sense for our tests to reflect that.
- on startup in blue_green mode, we will migrate
blue to green if blue is empty.
- otherwise, when blue has data, we verify
against green before proceeding with the
blue_green run.
- small optimization in the rbf cursorx.go to
short-circuit processing on a nil bitmap.
This avoids a roaringparanoia tag panic.
- back out holdbkg.go, was too slow.
add a distinct Holder.imu lock instead.
- add tournament.sh to do all pair-wise comparisons of blue-green backends.
- isolate txstores away from roaring index/ directories with indexname.index.txstores@@@ dirs.
- blue_green for doing migration. Called before Holder.Open finishes.
- holdbkg.go added for index lookup. Less wedging between a deadlock and a race.
- fix fault under read-only map under lmdb at
TestExecutor_Execute_Row_Range/RowIDColumnID by doing cow in roaring.
- roaring -tags gofuzz builds again
- roaringparanoia build tag added to make test targets in Makefile
- add rbf.NewDBWithAllocZero for out-of-bounds memory checks
- .circleci/config.yml test-shardwidth-22 with large run container, kept OOM-ing we suspect.
Fixes#819
- introduce Query Context (Qcx) for managing database-per-shard.
- replaces the MultiTx, so mtx.go is retired and removed.
- introduces the HolderConfig struct and all Holders now have
a path from birth.
- rbf speedups on bitwise writes
- badgerdb is removed due to unresolvable write conflicts.
fixes#703#676
The testhook/ package provides an easy way to set up multiple
hooks to run before/after tests are run.
The audit hooks track open and closes of storage backends,
files, indexes, and holders, for example. A tempdir wrapper
creates temporary directories which are automatically cleaned up
when the test ends. Any kind of resource creation that
should be closed at test conclusion can be tracked. We
will complain at the end of the TestMain if resources are
leaking.
Leaks under go1.13:
We use a wrapper function which is a no-op for go 1.13, but actually
calls testing.TB.Cleanup in go1.14, so we can still build with 1.13 even though
tests will leak files all over the place there. Because of this,
don't run the testhook tests when using 1.13, as they'll always fail.
- the test/pilosa.go http client now times out after 10 seconds
to help diagnose hung server situations.
- Makefile targets added to get better progress reports.
- lmdb as a backend (lmdb.go)
(lmdb is the fastest known transactional storage backend)
- per Tx call statics report enabled with PILOSA_CALLSTAT=true (stattx.go)
- framework for per-shard db (dbshard.go)
- txfactory handles any pair under blue-green testing (txfactory.go)
- enable CGO in Dockerfiles for lmdb
- rbf had races around the new rootRecords cache in tx
- rbf tx needed a write lock on the db now that rootRecords are written
- added a global registry for rbfDB to correctly dedup instances
- implement DeleteFragment, DeleteIndex for rbf
- use badger style keys for rbf to allow content checksumming to be list
containers in the same order
- lots of other integration of rbf into pilosa layer.
a) All tests green under -race for both PILOSA_TXSRC=roaring and PILOSA_TXSRC=badger.
b) Distinct is merged back into mainline pilosa.
Seebs notes on the Distinct work:
merge Distinct plugin back into main source tree, convert to Tx
We drop all references to the Preemptively Deprecated Don't You Dare
Use This extension interface, and move the one and only extension we had
(Distinct) into the main executor.
Also this fixes an arguable bug, which is that Container.AsBitmap()
would panic on a nil parameter, but it should have returned an empty
bitmap, because a nil *Ccontainer is a valid empty container. This
simplifies logic significantly in Distinct.
Fixes#569#570#571#572#573#584#585
- all tests green on RoaringTx
- RoaringTx on by default
- blueGreenTx testing framework available for A-vs-B comparison
of Tx implementations
- flag -tx added to server command line but not wired to
change NewIndex() selection yet.
- 918 green tests, 14 tests red on BadgerTx.
A full list of the 14 red tests on BadgerTx follows.
Note that these red tests represent not defects in BadgerDB
or BadgerTx but rather failures of the pre-existing pilosa infrastructure to yet
be fully adapted from files to using a transactional storage engine.
As such these are tests that RBF should not be expected to
pass yet either.
Fixing the pilosa infrastructure to allow these tests
to go green under Badger is the next and highest priority
order of business, but RBF can get much testing benefit
from the 918 green tests we do have, and hence we merge
as much as we have today.
The 14 red tests when NewIndex() is set to use
BadgerTx are as follows. Note in particular
that pilosa cluster resizing is not working yet under a
transactional store.
TestCluster_ResizeStates/Multiple_nodes,_with_data
TestImportClearRestart/0MaxOpN10000
TestImportClearRestart/1MaxOpN10000
TestImportClearRestart/2MaxOpN10000
TestImportClearRestart/3MaxOpN10000
TestExecutor_Execute_Existence/Row
TestExecutor_ForeignIndex
TestExecutor_Execute_CountDistinct/Distinct
TestExecutor_Execute_CountDistinct/Count(Distinct)
TestExecutor_Execute_CountDistinct/GroupBy(Distinct)
TestExecutor_BareDistinct
TestExecutor_Execute_TopNDistinct/TopN
TestHolderSyncer_IntField/BasicSync
TestHolderSyncer_IntField/MultiShard
This is sort of large, but it's annoyingly difficult to
separate out.
The basic idea is to allow us to have a single holder-iterating
block of code, which is associated with the holder, that can be used
for various things, like the snapshot queue background scan, or
for inspect operations.
We invent the concept of a HolderFilter, which is a thing that
can decide what things in a holder it cares about, and a HolderOperator,
which can also process those things selectively.
In the process, we fix up a couple of subtle bugs in the
inspect logic; specifically, the assumption that the mapped flag could
tell you whether a container was modified by the ops log doesn't
work with mmap, so we have a shiny new flag which is used to track
that, internal to the roaring/container code.
All of this leads to the actual *point* of this exercise, which is
making it easier to create an /inspect endpoint which produces almost
the same data we'd have gotten from `pilosa inspect` on a data directory;
the distinction is that it doesn't try to identify the distinction
between data from disk and data from operations since the file was
loaded. Possibly it should, but it doesn't yet.
The snapshot queue is now implemented using the HolderOperator
design, which requires some subtle changes to how it works, but
overall makes it easier to follow the snapshot queue logic,
and also shares that logic with the way Inspect works.
The holder's snapshot queue is now provided by the server, in
a default environment.
The queueless snapshot queue no longer triggers snapshots on
enqueue -- it turns out that breaks badly, because a key
point about enqueueing a snapshot is that it's safe to do it
*during* a transaction on that fragment, and triggering a
snapshot during a transaction actually causes horrible errors
as the ops log ends up being the old file, which we close.
Related to this, we also need to prevent closed fragments from
trying to snapshot, so we track fragment openness when opening
or closing, and bail on trying to snapshot a fragment which is closed.
We also stop using the queueless snapshot queue during tests,
because that's a horrible idea.
We copy a little bit of the partition logic from the cluster code so
we don't have to expose it all, this lets us check whether the node
we're looking at is the one which should be primary for a given shard,
and if not, identify which node would be. This works only when
pointed at a data directory, for now.
The test cases for the holder have to be internal, because pilosa
doesn't export view/fragment, just Index/Field. This means that the
holder test cases can't just use the test/* package, so they duplicate
some of its logic, approximately.
This is logically two separate things, but the individual changes
are thoroughly intertwined in the code.
The first change is a logical change to the design of the snapshot
queue, which is that it now adjusts the maxOpN the background scan
targets, allowing it to lower that value over time when things are
quiet. We do this because it turns out that on large data sets,
this can make a factor-of-four difference in memory usage!
So, in general, on a quiet system, each pass through the holder
aims for about 1/4 of the existing fragments to get snapshotted.
When there's more load, we adjust those values up.
We also make the snapshot queue a bit less chatty, to make testing
less annoying -- we only print stats if the queue enqueues at least
two snapshots, or skips any.
The second change is threading the holder through things. We've
always threaded the logger through, and then added the snapshot
queue, and some of the Inspect-related work led to wanting to
have a way to thread options through, so what if we just threaded
the holder itself through, and removed the direct copying around
of the logger, snapshot queue, and so on. Similarly, everything
can now use holder.PartitionN instead of having to get its own
copy of PartitionN handed out to each index.
This does imply ensuring that test cases always get a reasonable
default holder.
This is a precursor to adding additional information to the holder,
such as whether it's in a special read-only mode, which would imply
not modifying on-disk files. This is already semi-supported for
the specific case of the background snapshot queue and cache flushing,
which are attached to the (created in a previous commit) new
holder Activate method, instead of being automatic on holder Open.
The change to a snapshot queue can also cause races in tests, because
the fragment.Clean method's "sanity check" accesses a fragment without
a lock. Fix that. Since there's a couple of t.Fatalf(), but we need
to release the lock before closing, we use an anonymous function
with a defer to handle that. Whee!
I think this will improve the transaction response messages Kuba
mentioned where it was an empty transaction instead of a nil or not
there... if not it should make it easier to do that anyhow.
also adds a "noSleep" option to the server command to avoid the 5
second sleep we introduced on startup for non-coordinator cluster
nodes. The sleep doesn't seem to be needed in the tests and makes them
much slower.
This commit adds `TranslationSources` to the cluster
`ResizeInstruction`. These are the sources of translation
partitions which the receiving node needs in order to support
partition distribution in the new, resized cluster.
This also fixes a bug where index options were not being
encode in the proto Index object. That meant that the schema
transferred via protobuf was not correct. The reason why
things normally worked is because index creation typically
happens on the CreateIndex message, which does include the
options.
TODO:
- [ ] implement the TranslateStore interface for `InMemTranslateStore`
and `mock.TranslateStore`
- [ ] surely need some more tests around the `ReadFrom` and `WriteTo`
This PR adds support for anti-entropy syncing for integer
and decimal fields. It differs from the logic for other
field types in that it does not rely on a consensus to determine
what the value should be; instead, it considers the correct
values to be those of the primary replica. From there, data
is pushed to all non-primary replicas.
