* Add kafka support to CLI (fbsql)
This commit adds the ability to provide a `--kafka-config` command line
argument referncing a toml file to configure kafka.
* Move "Molecula Consumer" message to the logger; hide it in basic mode
* Fold decimal(scale) into kafka.source-type
* Build fbsql with cgo in docker for CI
* Re-organize the fbsql kafka config and setup.
Allow field config to use the table schema if no fields provided.
* Display timestamp fields with format RFC3339Nano
* remove kafkaRunner (no longer used)
* Fix cli/batch test (and make sure it's not excluded from CI)
The logic in our Makefile was exluding from tests any package with
`/batch` in the package name. This excluded `/cli/batch`, which is not
good.
This commit changes the exclusion logic to include the `/v3` portion of
the package name, so `/v3/batch`.
* Rename Basic() to SetBasic()
The caching of test results means that we get instant cached results
rather than actually running tests in some cases, which is virtually
guaranteed not to be what we want. There's almost no cases where
this actually speeds a thing up validly, and a lot where it speeds a
thing up invalidly.
* Separate the featurebase and fbsql make build targets
Using the same build target was problematic because they shared the same
flags. Since the `-o` output flag was used, the fbsql binary was
overwriting the featurebase binary.
* make sure the make package target builds fbsql
So, we were special-casing creating a ramdisk, and setting a special
environment variable for it, for boltdb translate files, to improve
performance.
But actually, etcd and test cluster data and so on all go in $TMPDIR,
and if you move all of those also into a ram disk, you get way better
performance. But 2GB may not be enough for that.
So!
We unify on $TMPDIR, we bump the default size to 4GB, we make the
size configurable, and we stop using the name RAMDISK. This should
improve performance on MacOS significantly for `make test` and
things like it, and also simplifies our lives by not having a special
case for the boltdb translate files.
Also change the environment variable names used in our CI config.
(I don't see where we mount the ramdisks, but I think that's happening
in our setup.)
* Add viper (for env variable) support to CLI
* Move the "featurebase cli" sub-command to its own "fbsql" command
I don't know if this is the final name, but putting it here as a
placeholder for now.
* Handle single `--command` flags.
This also adds a printer interface so we can opt NOT to print setup
information in non-interactive mode.
* Add support for multiple `--command` flags in the same call
* Add support for multiple `--file` flags
* Move members related to Config into a separate struct
* Make sure non-interactive mode can connect to a database
* comment fix
* support control-C on readline
* Prevent connection message from printing in non-interactive mode
* Return errors (instead of printing them) in non-interactive mode
* expose Transaction on TranslateStore for DAX Snapshotting
* try to fix ramdisk nonsense
apparently, we were running in either a shell env or docker env
randomly, so this could sometimes pass and sometimes fail since the
shell env had the ramdisk set up and docker didn't.
Now we force to run in docker always and set up ramdisk explicitly.
* debug ramdisk issue?
* fix tests... and a buncha other stuff
The executor test I modified failed when I changed DefaultPartitionN
to 8, but just because stuff was out of order so I made it more
robust.
I edited some data gen stuff to make shorter lines because it was
making grep results unusable.
the actual fix is in translate_boltdb_test.go
* clean up, fix code review feedback
(cherry picked from commit 3693b9950a)
Reproducible builds are something we should be doing, and we are there
as far as making them in CI is concerned with this change.
The changes to the Dockerfile/Makefile do nothing if the
SOURCE_DATE_EPOCH environment variable is not set before `make build`
happens, or if the build arg is not passed in to docker.
(cherry picked from commit fd93fc99c9)
In this commit, the Directive is mocked; it doesn't actually reach out
to a controller.
Limits key translation to only those partitions (per index) specified in
the Directive. Attempting to create or find a key (or ID) for a
partition which is not handled by this node will result in an error;
translation requests are no longer forwarded to other nodes.
Limits import into only those shards specified, per index, by the
Directive. Attempting to import into a shard which is not handled by
this node will result in an error.
Stub out /directive endpoint
The `applyDirective()` method still needs to be implemented.
Update mds references to use the new /mds/types structure
In mds, we moved the shared types to mds/types. FeatureBase needs to
reference those instead.
This also bumps the mds version in go.mod.
Implement the Add/Remove Index part of Holder.ApplyDirective()
This adds functionality to `Holder.ApplyDirective()` which adds or
removes indexes (tables) based on those provided in the Directive. Still
to be implemented here: shards and partitions.
WIP: remove client from Batch
Move Batch into its own package: batch
Also, in order to avoid import loops, this introduces packages:
/batch/types
/client/types
Reorganize the Importer-related code
Moved the Importer interface to package: batch
Move the "pilosa client" implementation of the Importer interface to
package: client
Modify batch.NewBatch to take an Importer (not client)
This commit modifies the batch.NewBatch() function to use a functinal
option on Batch to inject an Importer into the Batch. Prior to this,
NewBatch() took a pointer to a client, which was a little too
restrictive. Now, MDS can implement an Importer which uses information
from MDS to determine to which node(s) the import calls should be directed.
Add client.SetAuthToken() method to satisfy SchemaManager interface
Update ApplyDirective logic to include fields.
This needs more work, but it was enough to get a basic test passing.
Move Transaction type into /types package.
Add interface check on batch.Importer no-op implementation
Updated ApplyDirective to create all currently support Field types
There are still the following TODOs:
- [ ] impolement field options (ex: decimal scale, int min/max, etc).
- [ ] `time` fields
Added support for Decimal.Scale in ApplyDirective
Update mds dependency
Add /health endpoint
Update to use dax (dax/mds) instead of mds.
After moving the mds repository into the dax repository as a
sub-package, this commit changes everything in FeatureBase to use the
dax repo instead of the now abandoned mds repo.
Introduce and implment the WriteLogger interfaces.
This adds both a `WriteLogReader` and `WriteLogWriter` interface. They
are both implemented by the implementation: `fileWriteLogger`. The
`fileWriteLogger` uses the dax/writelogger API to append log messages to
files on disk.
Add WriteLogWriter.ImportRoaring method to interface
This commit adds the `ImportRoaring` method to the `WriteLogWriter`
interface. Still to implement are the `Import` and `ImportValue`
methods.
Reorganize the ApplyDirective code
The primary goal was to cache the incoming Directive on the Holder prior
to applying all of the changes in the directive (i.e. loading data from
the WriteLogger) because applying those changes often validated against
the accepted state of the node.
Implement all of the WriteLogger read/write methods
Implement the HTTP WriteLogger implementation
WIP: Introduce shard.Version. Implement snapshotter.
Add HTTP Snapshotter implementation
This also recofigures server to use the HTTPSnapshotter instead of the
FileSnapshotter.
Implement snapshotter: TableKeys
Implement snapshotter: FieldKeys
Dependency dance
last of the dependency dance
Add support for prototype
This adds the Makefile targets to build the docker container and push it
to ECR.
SQL3 changes which break with dax changes
Missed TODO: implement FieldVersion version to WriteLogger
Address bug causing missing TranslateStores to error
Originally, we tried to limit the TranslateStores which get allocated to
only those for which the node is responsible. This works when adding a
new table. But if a table already exists, there's no logic to start
missing TranslateStores.
This reverts back to the old FeatureBase logic which brutishly allocates
a TranslateStore for every partition, even if one is not needed.
We need to address this by allowing the ApplyDirective logic to
initialize TranslateStores when they don't yet exist.
Move the ImportRoaringShardRequest type to the types package
Since the ImportRoaringShardRequest object is part of the Importer
interface, we need to move it to a non-root (i.e. pilosa) package. All
the other interface types are either concrete types or part of a
sub-package (such as roaring). We do this to prevent an implementer of
the interface from having to import the entire pilosa package and risk
circular imports.
buncha changes to support latest dax stuff
Move dax related types to /dax sub-package
This commit moves all the common "dax" types into the /dax sub-package.
The idea is to ensure that featurebase does not import dax at all.
It's ok if dax imports featurebase.
In the future, we might need to split the dax sub-package (common data
types used by muliple molecula data-plan services) into it's own repo.
Add type: dax.Schema
This isn't currently being used; I started to use is as a replacement
for pilosa_client.Schema, but then deferred that. But we'll need to do
it eventually, so it doesn't hurt to have this type in place.
Export RowIDs.Merge() method for use in orchestrator.
Add CreateSQL method to dax.Table type
The CreateSQL() method will return the "CREATE TABLE" statement required
to create the dax.Table.
Comment out confusing writelogger log message.
We need to revisit this, but for now, this log message is confusing.
Also, rename daxSharder to versionStore.
Remove hard-coded AWS account
Implement more FieldOptions such as Epoch
Some of the FieldOption logic was stubbed out in the dax package. This
commit fills that out more; specifically, it adds the
dax.Field.Options.Epoch parameter.
export stuff needed for TopK in orchestrator
export ValCount stuff to implement Percentile in orchestrator
export more stuff to support less code in orchestrator, shared objs
Port dax repo over to featurebase/dax (run all as sub-services)
This commit does ALOT. Sorry.
It introduces a `featurebase dax` sub-command which can be configured to
run the various dax services as sub-services within the same process, or
individually as the lone service in process.
It also changes all the URL paths to be prefixed with the service name.
So for example, instead of calling localhost:8080/status, you would now
call localhost:8080/featurebase/status.
Also, note that all services provide a /health endpoint to confirm they
are running in process.
Clean up integration tests. Remove PILOSA_ config prefix.
Remove duplicate clients (mistake from porting dax to featurebase)
Rename sub-service "featurebase" to "computer"
In the places where we have hard-coded the sub-service name into a URI
path, I've tried to tag the line with a comment containing:
`// #SERVICEPATHPREFIX`
Update copilot manifest files to reference "computer"
Port dax/README.md from dax repository
Separate (toml) Queryer Config from Injections
We needed to separate the toml config from the configuration required to
inject sub-services into the Queryer. I'm not sure this is the best
solution, but it's *a* solution. So here we are.
Clean up (i.e. remove) the queryer "implementations" package
Remove old test file
Run WriteLogger and Snapshotter as local sub-services.
Prior to this commit, the writelogger and snapshotter services only
worked when run as separate services. This allows them to be run in the
same process as all the other dax services.
There is still some naming issues that we should address, but it's
functional for now.
Clean up (i.e. organize) the intra-service interfaces.
Implement alpha Director for local messages from MDS to Computer
Prior to this commit, messages from MDS to the computer service were
still going over http. This commit introduces an interface
implementation which registers the local computer command, and use that
command's API to directly reference methods used by the Director.
Clean up a few more interface names
Add Queryer OpenAPI document.
Update copilot manifests to reflect latest changes
Add OpenAPI documents for WriteLogger and Snapshotter
Add OpenAPI document for MDS service
Add OpenAPI document for Computer service
Consolidate errors to use fb/errors package.
This commit is a first pass at trying to ensure that all of the DAX code
uses:
"github.com/molecula/featurebase/v3/errors"
This package is a wrapper for "github.com/pkg/errors", so going forward
we want to avoid importing that package.
The only method which isn't backward-compatible is `New()`; the
New() method in the featurebase/errors package takes an errors.Code. If
this becomes a problem, we could change this by reverting New() and then
introducing something like NewCoded(). But for now I think it might
actually discourage someone from just creating a New() error without
thinking about how it should be coded.
Introduce VersionStore interface
Move the existing VersionStore code to the `inmem` package as the
in-memory implementation of the new dax.VersionStore interface.
Introduce NodeService interface
With this, the Controller can maintain a registry of nodes by using this
NodeService interface as opposed to an in-memory map of nodes on the
Controller struct.
This also adds an inmem implementation of the NodeService interface.
Introduce controller.Balancer interface
This moves the existing balancer package to controller/naive package.
The idea is to allow us to add a different Balancer implementation in
the future.
Introduce DirectiveVersion interface
This commit also includes *A LOT* of refactoring to use dax.Worker and
dax.Job types everywhere instead of strings.
Introduce Schemar interface
The previous `Schemar` struct was moved to the `schemar/inmem` package,
and `Schemar` is now an interface implemented by that inmem package.
Remove unused type `nUnit`
Add boltdb implementation of VersionStore interface.
This removed the previous sqlite implementation; we decided not to use
sqlite for now (as a basic, local disk implementation) because it
requires CGO.
--------------------------------------------
No longer applicable:
Add sqlite implementation of VersionStore interface.
This commit implements the VersionStore interface using sqlite. Sqlite
requires CGO, so this may not be something we want to include, but it's
implemented here to get a feel for how an external implementation might
be used; the next step will be to determine how the user configured
FeatureBase to run using sqlite as a backing store for services like
MDS.
Add boltdb implementation of NodeService and DirectiveVersion interfaces.
Add boltdb implementation of naive Balancer interfaces.
This includes the two interfaces defined in `naive/balancer.go`:
- WorkerJobService
- FreeJobService
Add boltdb implementation of Schemar interface.
clean up a linter issue
Thread context.Context through all the interfaces.
Some of the interface implementations are going to use context, so we
need to make that part of the interface. The boltdb implementations, for
example, take a context. This is probably so we can do things like
cancel or timeout operations.
Update interfaces to return error; remove `panic(err)` everywhere.
Down-rev grpc version to 1.38.0
Later versions (after 1.42.0?) cause MustRunCluster.Close() in tests to
deadlock.
This commit also adds an `isComputeNode` feature flag around some of the
write log and shard/partition check functionality so that it doesn't run
under normal conditions (this is excercised by running the sql3 tests
for example).
Add MDS_Persistence test to cover meta data persistence
This adds a basic test which configures the MDS container to use boltdb
as its persistence storage, saved on a docker volume. Then, the mds
container is stopped/replaced, and we confirm that the data stored on
the volume is availble to the new MDS container.
Fix a few things after rebase with sql-experiment branch
The lastest version of sql-experiment contains a fairly significan
refactor of the way query iteration works. This commit adjusts for those
changes.
pull dax IDK changes in to FB IDK (#2177)
* pull dax IDK changes in to FB IDK
* Move docker-related IDK build stuff to featurebase root
Building the docker image required the root level go.mod and vendor
directory. This change moves the make targets to the root level
Makefile, and the Dockerfiles now copy the root level vendor directory
(and everything else in the root for that matter).
* Fix batch- and client-related tests
* InitializePoller on MDS restart/replacement
Prior to this change, if MDS was restarted, its internal poller (which
maintains an in-memory list of nodes to poll) is empty. This is bad,
because it doesn't know about nodes that it should be polling.
This change fixes that. Upon MDS startup, it intializes the poller with
the list of nodes that MDS keeps in persistent storage (currently:
boltdb).
* Add EFS volume to MDS Copilot manifest
This allows us to use MDS's persistent storage (via boltdb) in the
Copilot demo by saving metadata in a boltdb file on EFS.
* Thread logger.Logger through all dax components
* Revert some of the breaking changes from DAX development.
When we first started prototyping DAX, we made changes to the
featurebase core code which would have broken the existing featurebase
functionality. This commit reverts some of those changes. Anywhere that
we need to modify core featurebase functionilty, we put it behind some
kind of feature flag. This flag is typically determined by whether the
running node is a "compute" node (i.e. DAX.COMPUTER.RUN = true).
Co-authored-by: Travis Turner <travis@molecula.com>
add packaging for DAX
need cgo for datagen build
bind to 0.0.0.0, pass GOOS and GOARCH explicitly
not sure if the explicit GOOS/GOARCH is actually necessary...
Get INSERT INTO (aka ingest) working through SQL3
This commit does a few things which I'll try do describe here.
- Introduces a Qctx interface. The existing Qcx is an implementation of
this interface, and can be used exactly how it has been. But this
allows us to abstract away the notion of Qcx in the Queryer (which is
handling SQL3) until we're ready to address that. As an example, the
Qcx has a notion of a featurebase Holder, but that doesn't make sense
when we're at the Queryer layer. For now, the Qctx used in the Queryer
is a no-op.
- Adds a ComputeAPI interface implementation for the Queryer. This is
effectively the Import() and ImportValues() methods used for ingest.
The logic here handles the incoming ImportRequest by first doing any
necessary column and row translation for the entire request, then it
splits the records by shard, and generates a new ImportRequest per
shard with only the shard-appropriate records.
- Changes the mds.Importer to take an MDS interface implementation
(which can be an mds client) instead of an mdsAddress. This allows us
to use a localy MDS implementation rather than assuming we need a
client to make calls over a network.
Add queryer.Importer interface to handle ingest via SQL (#2203)
* Add queryer.Importer interface to handle ingest via SQL
This is meant to support ingest through SQL when the queryer and the
compute services are running in the same process, or when they are on
seperate processes and need to talk via http client.
* remove datagen from RPM
was originally added as a convenience to generate test data, but is
unused and annoying because datagen doesn't easily cross-compile due
to cgo
* add marshalUnmarshal to controller to avoid passing pointers
passing pointers across API boundaries can cause unpredictable things
in local vs remote configurations.
Co-authored-by: Matthew Jaffee <jaffee@pilosa.com>
"fix" a few issues with wrong default partition numbers
these still need to be properly fixed and actually get the correct
data from MDS
go mod tidy
Introduce TableQualifier (OrganizationID/DatabaseID) (#2220)
* add check in ApplyDirective that version is increasing
fix TestAPIDirective to make version always increasing
* fix docker image build and break out dax test in CI
We have to run the DAX integration tests separately as they call out
to Docker, and so it isn't easy to run them in a Docker container as
the other tests do. So we run them directly on the CI runner which has
Docker and Go installed.
We also explicitly exclude these tests from running during the other
tests.
Also my editor was automatically reformatting some comments badly
which is why I added the "data" thing in those two places
* add timeout to poller
* give Poller a default Logger
apparently we can NPE sometimes, seen in CI: https://gitlab.com/molecula/featurebase/-/jobs/3028286364
* bunch of testing fixes, mostly IDK/DAX related
make MDS error if sendDirectives errors, don't just
log. sendDirectives can error if computer nodes disagree about the
validity of a schema (for example), in which case it might need to get
deleted and user notified somehow. very messy, needs more thought.
re-introduce old env prefix to maintain compatibility with master
branch
make self-contained dax container for IDK testing
build IDK images from source (now that all the source is available
since it's in the same repo)
catch errors in DoExtractQuery in idktest.go
fix IDK bug where prefix path was hardcoded in all cases rather than
only when useMDS was true
fix TestBatchTargetMDS... needed to add field options and catch error
when creating table. also needed an _id field
* fix env prefix in tests
* WIP getting tests to pass, wanna see CI
* don't error if we get a zero version directive and we don't have a
directive yet
* cleanup debugging junk
* "fix" future.rename thing, run IDK tests
* Introduce TableQualifier (OrganizationID/DatabaseID)
This commit introduces a lot of new types (in dax/table.go) related to
TableQualifer (which is made up of OrganizationID and DatabaseID), as
well as things like TableID and TableKey.
For the most part, we try to thread a QualifiedTableID through the
entirety of DAX. There are some places (for example in the Balancers,
which are just aware of string keys) which use a string TableKey
(tbl__org__db__tableid).
* Remove some debugging comments
* Add Org/DB support to CLI.
This commit adds support for special commands:
SET
SET ORG acme
SET DB db1
USE db1
* remove ".pulled" from IDK Makefile
I don't think we need it any more as most things can be built
locally. I think it was only there to refresh the FeatureBase images
that were tagged as master, but we don't need to do that any more.
* Change DAX json tags to kebab-case (i.e. hyphenated)
This commit also renames some struct arguments to more accurately
reflect their type: for example, renaming `Table` to `TableKey` when the
type is TableKey.
* Return DAX TableName in SHOW TABLES (instead of Index.Name)
There are cases where SchemaAPI is used to return DAX friendly table
names (as opposed to featurebase index names, which are DAX TableKey).
This is an attempt to do that. With that said, it's not ideal because
anything could call those API methods and expect the other type.
* Fix a bug which wasn't completely dropping a table.
When using boltdb as a backend, DROP TABLE wasn't removing the
reverse-lookup key for the table in boltdb.
* Remove idk/testenv/certs which got accidentally committed.
also update .gitignore to include those.
* Fix IDK ingest tests to be TableQualifier aware.
* Add example Table types to dax/table.com godoc.
* ignore idk.Main fields for flags, upgrade commandeer
* go mod tidy
* Fix DAX integration tests: ingester using wrong ENV VARs
We change from ORGANIZATION_ID to ORG_ID
and from DATABASE_ID to DB_ID
* Clarify things around idk (docker) tests
* Stop running TestKafkaSourceIntegration with t.Parallel()
This test can't be run in parallel as it's currently written. Doing so
allows for interleaving of messages to the same kafka topic between
tests.
I didn't attempt to modify the test so it could be run in parallel. That
could be done, but left for someone more ambitious.
Co-authored-by: Matthew Jaffee <jaffee@pilosa.com>
Require Directive.Version be a non-zero value. (#2227)
Because the directive cached on the holder is not a pointer, its default
version is 0. In order to avoid having to compare against that, we just
require that Directive.Version start at 1.
General, non-invasive code cleanup and comment adjustment.
Move ImportRoaringShardRequest out of the types package
Early on in the DAX development, I moved ImportRoaringShardRequest into
a types package. There must have been some import loop going on, but
since that is not longer the case, it's safe to move this back into the
core featurebase (er... pilosa) package.
Move Transaction struct back into the pilosa package (from types)
Revert some name changes (cli -> client)
Add DAX Handler CloseTimeout
This was implemented in htt_handler.go, but it had been commented out in
the DAX handler. This just uncomments that and finishes the
implementation.
Remove Qcx from queryer.Importer interface
This sets us up to revert the Qctx interface that was initially
introduced to allow us to abstract away the need for a Qcx when calling
the ComputeAPI from a remote service (i.e. the queryer).
Add some go-doc comments and remove unused code.
Move SchemaManager setup from datagen to idk.Main (#2233)
The set for idk.SchemaManager (for dax implementations) was previously
in datagen. This may have been because of some import loop problem
during development, but that's no longer an issue.
The setup for this should be in idk.Main so anything using that can
leverage the MDS-specific SchemaManager setup.
Fix issues around nil TxFactory
First, don't return a nil. Rather return a new *TxFactory (with no
holder).
Second, don't call `f.holder` in the testhook outside of checking if
`f.holder` is nil.
Wrap all bare errors
Make service prefixes constants
Instead of having `"computer"` throughout the code, use instead a
constant: `dax.ServicePrefixComputer`.
MDS skip errors when sending empty directives
also add in the docker-login and ecr-push changes for serverless DAX
Fix the logic in Directive.IsEmpty() (#2236)
Update the cached value for Index.translatePartitions
In the case where a node already knows about an index, but its
assignment of partitions for that index changes (for example, when
another node goes down and the node in question is now responsible for
more partitions than it previously was), then we need to update the
cached value of Index.translatePartitions because that's used in
translation checks.
minor fixes for IDK-related bugs
WIP: tokenize CLI to access cloud
FB CLI cloud support with automatic token refresh
Also adds support for a GET command which allows making HTTP GET
queries to cloud CP which can be handy for debugging stuff. E.g. GET /v2/databases
buncha little fixes working on writelogger stuff
fix writelogger/snapshotter setup bugs
implement writelogging for importRoaringShard
add debug endpoint to MDS
use shard transactional endpoint in MDS datagen
add debugging to API related to writelogger
revert handleroption change
clean up big PR
remove "GET" command from CLI for making arbitrary HTTP request to
cloud control plane (was a messy hack and not that useful)
remove json tags from FB objects where we had to duplicate the object
elsewhere due to import loops and weren't actually json encoding it
unexport handlerOption which was exported to try to avoid doing
certain things if we're in DAX mode, but I didn't end up merging that code.
remove (hopefully) unecessary extra call to api.indexField
fix some formatting, unexport some vars, godoc, etc
oops, fix build failure
Update FeatureBase CLI to support a standard deployment
The standard deployment uses a different endpoint and request payload.
This commit tries to detect is the standard deployment is being used,
and if so, it uses a standard-specific FBQueryer.
It also modifies the auto-detection logic to try standard featurebase
and dax ports in the case where a port was not provided.
MDS API refactor (#2259)
* MDS API refactor
table IDs are exposed but only created server side
also cleaned up dax Makefile
* clean up review feedback
Co-authored-by: Travis Turner <travis@pilosa.com>
* remove TablesByName
* rip out inmem implementations and use boltdb everywhere
* remove inmem balancer, create bolt tempfile by default on startup
* WIP on snapshot table impl and test
* Minor comment and code layout adjustments.
This commit also adds the `Equals` method to `QualifiedTableID` for
equality comparisons. It's no longer safe to compare struct (two structs
might still be equal even if one of the structs doesn't have a `Name`
value.
* Use a unique docker network for each dax test
Ocassionally we would see some test failures due to a network already
existing. This shouldn't happen, but to avoid that, this commit
generates a unique name for each sub test (which gets deleted at the end
of every test).
* Fix one instance of NewQualifiedTableID losing Name
We should probably check the other instances and see if Name is getting
lost.
* simplify unique network stuff and fix api directive tests
* Remove TableIDRequest and TableIDResponse types for /table-id (#2267)
For the mds/table-id http requests, just use dax.QualifiedTableID as
both the request and response types.
* remove lattice from dax, no error on node re-reg, dax docker-compose
* various updates
* WIP: mds-refactor branch review
* no-op on SnapshotTableKeys if table is not keyed
* Makefile helpers
* add doWeCare so controller doesn't fail unnecessarily
* clean up table creation (#2272)
* Strip underscores from TableID stub name
* fix boltdb versionstore tests: generate unique, sorted tables
* fix controller test related to reregistering a node
* JobSet -> generic Set
Co-authored-by: Travis Turner <travis@pilosa.com>
Co-authored-by: Travis Turner <travis@molecula.com>
Cleanup after rebase on master
The latest rebase on master entailed all the client/batch changes as
well as some of the qcx refactoring. It made for a hairy rebase. This
commit fixes some of the tests that were failing after that rebase.
Fix batch/client import loop missed during rebase (#2280)
It's not surprising that `batch` can't import `client`. It was doing
that here (importing an error type from the `client` package). What is
surprising is that it's okay for `batch_test.go` to import `client` even
though `batch_test.go` is an internal test and therefore part of the
`batch` package.
different boltDB's for schemar/controller, explicit balancers
nice helpers for dax docker-compose, make build really fast
build FB binary outside of docker, then create Docker image with its
working dir in an empty subdirectory so it doesn't send a GB of
context to the daemon.
error on unassigned jobs and use client with timeout
fix CR feedback
deregister batch of nodes
also make removal faster via director dial timeout
implement WorkersForJobPrefix so orchestrator doesn't make up shards
also fix some godocs and remove unused method
Run sub-tasks of a Directive concurrently in a worker pool. (#2275)
* Run sub-tasks of a Directive concurrently in a worker pool.
This allows the compute node to concurrently load shapshot and writelog
data concurrently, instead of one keyset/partition/shard at a time.
It introduces a config parameter called `DirectiveWorkerPoolSize`.
* code review cleanup
* Use unique container names in DAX integration tests
We were seeing "container already exists" errors in CI, so just to be
safe, this commit constructs a unique container name for every container
in the DAX integration test run.
Stub in SystemAPI to Queryer (note: will not work if used)
This just makes is so that dax can compile. Actually implementing
system-table functionality for dax will take some planning.
Tlt/dax merge prep (#2282)
* Remove copilot directory
* Remove Dockerfile-datagen-long
* Remove orphaned RegisterNodeRequest
This type is not defined in the dax/mds/http package.
* implement TIMEQUANTUM and TTL in Table.Field type
* Remove the "service" misdirection in queryer/writelogger/snapshotter.
We had originally used an additional layer, er.. package, for a "service".
The main distinction was that the Config differed in that it was
internal, unlike the Config that we need to provide for the top-level
server config (i.e. toml). Having that additional layer just to support
a different Config seemed premature at best. So I'm removing it.
* Remove dax docker containers no longer used in tests
Since we run everything as "featurebase", we don't have multiple
container types anymore.
* Some minor comment updates
* Remove nfpm stuff related to dax
* Fix linter issues
Fix "duplicate" issues raised by sonarcloud.
run docker components of dax integration tests with coverage
trying to get dax integration coverage
add coverate volume mounts throughout dax integration tests
add a lock, tweak dax Makefile, remote flag on query handler
remove some unused code
convert batch tests to use clustertests to get coverage
maybe fix clustertests
more authclustertests fixes, test is failing locally
but also seems to have been silently failing in CI prior to these
changes... let's see if it's still silent
fix some lint to kick CI
just re-running the job wasn't working... strange behavior
remove RetryLogic test and pipe which don't work
RetryLogic test removed due to etcd changes. Seebs thinks we shouldn't
test this here.
Pipe was being ignored since we're no longer using "bash -c" to
execute the command. If we need to generate that output file we'll
either have to reintroduce bash -c and set -o pipefail so that it
actually fails properly, or figure out some other solution.
shooting into the dark...
first cut at bulk node registration
remove unused stuff from batch tests, set coverpkg to ../...
batch registration timeout and fix tests
disable most tests and don't run fb background batch test
debuggin!!!!!!!!!
and then he tried this....
Implement importer (for INSERT INTO) in the Queryer
Prior to this, we we passing a nil value in for the importer to the
planner.NewExecutionPlanner in the Queryer. This meant that INSERT INTO
statements didn't work. Now they should.
It uses the importer that we build for IDK in /idk/mds/importer.go, and
wrapps that with a type that can determine if the provided string
"index" is of the form indexName or TableKey.
turn off debug mode, fix log saving
Run sql3 test definitions in a dax integration test
There are currently 22 tests which are not passing. They are skipped in
the "skips" slice.
WIP, not working, pql queries to tests
Add TableQualifier to PQL query logic in the Queryer
Add more PQL tests to the keyed table
Allow instant node registration if registration-batch-timeout=0
When running dax services in process, we don't want to wait 3s for the
compute node to register; we know it's there because it's in the same
process.
Fixes related to IncludesColumn PQL test.
Tests for ConstRow and FieldValue
cleanup
add UnionRows and Options, better error reporting on bad queries
delete unused schemar client.go, clean up unused in batch test CI
move test timeouts into more reasonable territory
apparently this had already been done, but got merge-stommped at some point
move dax bolt test helpers into dax package
Add computer CheckIn routine (#2296)
* Add computer CheckIn routine
This adds a background routine which sends a "check-in" request to MDS
every <interval>. This is to address the case where the poller has
removed a computer node from the node list (due to a network fault, for
example), but the node is still healthy and becomes available again. In
that case, the node needs to "check-in" to tell MDS it is still there.
MDS will likely send the node a new directive with Method=reset telling
the node to delete all of its data an apply the latest directive.
* Don't send directives to Deregistered (i.e. removed) nodes
We have an issue where we're locking on sendDirective in the
controller, and when the node is unavailable, the send hangs and never
releases the lock. This is a temporary fix for that until we address the
real problem.
Fix .gitlab-ci.yml after rebase
fix some indentation shenanigans
(cherry picked from commit 20a8b5713a)
* Formatting adjustments made during code review.
While reviewing the BULK INSERT logic (in order to decide how best to
approach "ingest via sql" in the cloud), I made a few formatting and
comment changes. I'm just adding them here as a separate commit so they
don't muddy up my actual work.
* Parser modifications to support mulitple tuples in INSERT INTO
This commit doesn't include all of the changes required in the
planner. Fow now, the planner is simply modified to continue supporting
a single tuple (the first tuple in the list).
* Update the planner to handle multiple INSERT INTO tuples
This is part 1. It's still using the existing logic which builds an
ImportRequest for every record (and every field!).
The next step will involve using a client.Batch to handle the records.
* Introduce client.Importer interface (used by client.Batch)
Instead of the Batch having a pointer to a client, this puts an
interface there instead (which the client implements). It also allows us
to inject a different importer (i.e. other than a featurebase.client)
into the Batch.
* Decouple batch from client
This commit pulls batch-specific code out of the client package and into
a new batch package. It introduces the batch.Importer interface, the
methods of which replace all the calls that batch was previously making
directly to client methods.
Finally, it contains two implementations of the batch.Importer
interface: one is a wrapper around client, and the other is a wrapper
around featurebase.API.
* Use docker (instead of MustRunCluster) for internal batch tests
Because the `batch` package tests are internal, using
test.MustRunCluster() resulted in an import loop (because it eventually
imports `server`, and we can't have that). So this commit replaces the
use of `test.MustRunCluster()` with docker. The setup is basically the
same as that used in the idk docker tests.
Here we also remove all client-side references to `UseIngestAPI`, which
is an experimental (json) ingest api. It's still suppored on the server,
but here we remove the external usage of it.
* cherry-pick fix
* Use batch.Import() for sql3 INSERT INTO statements
* Thread logger into sql3
* fix batch test
* Fix some shadowing complaint by linter
* Address some test issues related to stringsets
* Exclude batch integration tests from CI
* Address PR feedback
- Added description to batch.README
- Consolidated grep commands in .gitlab-ci.yml
- Removed some debugging comments
- Replaces some inadvertantly removed license headers
* Add batch package to gitlab CI
* Updated CI for batch package
Updated CI include path
Update gitlab ci
Update CI
Update CI
Trying new include path for ci
Updated gitlab ci include path
Made idk race job optional for sonarcloud upload
add testdata directory
remove testenv from dockercompose file
use GIT_STRATEGY clone in batch CI
add testdata volume to dockercompose
Co-authored-by: Fletcher Haynes <fletcher.haynes@generalassemb.ly>
(cherry picked from commit 00ef2380e5)
* use t.Fatal(f) to abort tests, not panic
* make perf_able run at all, make it debug a bit better
switch perf-able to using same node type we use for other spot instances,
because otherwise it never finds any available capacity.
we switch the perf-able script to use the standard get_value function
instead of direct jq calls.
we try to grab server logs if the restore fails in the hopes of finding
out why the restore very occasionally fails.
* Fix some issues with running IDK tests in docker. (#2248)
*Stop running TestKafkaSourceIntegration with t.Parallel()
This test can't be run in parallel as it's currently written. Doing so
allows for interleaving of messages to the same kafka topic between
tests.
I didn't attempt to modify the test so it could be run in parallel. That
could be done, but left for someone more ambitious.
* Remove idk/testenv/certs which got accidentally committed.
also update .gitignore to include those.
* changes to add bool support in idk (#2240)
* initial changes to add bool support in idk
* modifying some default parameters for testing, will revert them later
* adding support for bool in making fragments function
* boolean values implementation without supporting empty or null values at this point
* Implement bool support in batch using a map (and a slice for nulls) (#2247)
* Implement bool support in batch using a map (and a slice for nulls)
* Keep the PackBools default for now
But set it explicity in the ingest tests which rely on it.
* Modify batch to construct bool update like mutex
The code in API.ImportRoaringShard has a switch statement which causes
bool fields to be handled like mutex fields. This means, that the
viewUpdate.Clear value should only contain data in the first "row" of
the fragment, which it will treat as records to clear for *all* rows.
This makes more sense for mutex fields; for bool fields, there's only
one other row to clear. But since the code is currently handling them
the same, we need to construct viewUpdate.Clear such that it conforms to
that pattern.
This commit also adds a test which covers this logic.
* Remove commented code; revert config for testing
This commit also removes the DELETE_SENTINEL case for non-packed bools,
since that isn't supported anyway.
* Revert default setting
* remove inconsistent type scope
* correcting the logic of string converstion to bool
* resolving an error in a test
* adding tests to cover code related to bool support in batch.go file and interface.go files
* modifying interfaces test
* added one more test case
Co-authored-by: Travis Turner <travis@pilosa.com>
Co-authored-by: Travis Turner <travis@molecula.com>
* resolving bool null field ingestion error (#2254)
* resolving bool null field ingestion error
* testing issues
* adding null support for bools
* updating the null bool field ingestion
* trying to resolve issue when ingesting null value for bool type
* adding a clearing support for bool type
* resolving issues with bool null value ingestion
* updating the jwt go package version and removing changes made in docker compose file
* reverting jwt go version
* removing v4 of jwt
* adding a comment in test file to see if sonar cloud accepts this file
* don't obtain stack traces on rbf.Tx creation
We thought stack traces were mildly expensive. We were very wrong.
Due to a complicated issue in the Go runtime, simultaneous requests
for stack traces end up contending on a lock even when they're not
actually contending on any resources. I've filed a ticket in the
Go issue tracker for this:
https://github.com/golang/go/issues/56400
In the mean time: Under some workloads, we were seeing 85% of all
CPU time go into the stack backtraces, of which 81% went into the
contention on those locks. But even if you take away the contention,
that leaves us with 4/19 of all CPU time in our code going into
building those stack backtraces. That's a lot of overhead for a
feature we virtually never use.
We might consider adding a backtrace functionality here, possibly
using `runtime.Callers` which is much lower overhead, and allows us
to generate a backtrace on demand (no argument values available,
but then, we never read those because they're unformatted hex
values), but I don't think it's actually very informative to know
what the stack traces were of the Tx; they don't necessarily reflect
the current state of any ongoing use of the Tx, so we can't necessarily
correlate them to goroutine stack dumps, and so on.
* fb-1729 Enriched Table Metadata (#2255)
enriched metadata for tables
added support for the concept of a table and field owners in metadata; mechanism to derive owner from http request metadata; metadata for table description
* tightened up is/is not null filter expressions (FB-1741) (#2260)
Covers tightening up handling filter expressions that contain is/is not null ops. These filters may have to be translated into PQL calls to be passed to the executor and even though sql3 language supports nullability for any data type, currently only BSI fields are nullable at the storage engine level (there is a ticket to add support for non-BSI field here FB-1689: IS SQL Argument returns incorrect error) so when these fields are used in filter conditions we need to handle BSI and non-BSI fields differently.
* added a test to cover the keyword replace as being synonymous with insert (#2261)
* update molecula references to featurebase (#2262)
Co-authored-by: Seebs <seebs@molecula.com>
Co-authored-by: Travis Turner <travis@pilosa.com>
Co-authored-by: Pranitha-malae <56414132+Pranitha-malae@users.noreply.github.com>
Co-authored-by: Travis Turner <travis@molecula.com>
Co-authored-by: pokeeffe-molecula <85502298+pokeeffe-molecula@users.noreply.github.com>
Co-authored-by: Stephanie Yang <stephanie@pilosa.com>
* removes build time constant in favor of single constant with relevant godoc and warnings
Co-authored-by: Christopher Lowenthal <christopher.lowenthal@molecula.com>
* squashed 45 commits into one :)
* tlt/sql experiment (#2035)
* Move PlanOperator to sql3/planner/types package
includes:
type PlanOperatorColumn struct
type PlanOperator interface
* Remove planner dependencies from pilosa package
The goal after this is to prevent the planner package (which doesn't exist yet)
from being imported by the pilosa package; we just want it injected into the server
in server/server.go. This is because the planner package uses pilosa types, so we need
to avoid circular dependencies.
Added ExecutionPlannerFn
Make public: pilosa.ExecOptions
Added a pilosa.Executor interface
Added a planner.types.CompilePlanner interface
Isolated the planner calls to:
- Executor.Execute()
- *API.[method]()
* Move executionplanner files into the sql3/planner package.
This required a bit of gymnastics, and there are some things around
FieldOptions which need to be addressed soon.
* Remove the hacky FieldOptions stuff I added earlier
This implementation just uses the pilosa.FieldOption functional options
provided by the API (as opposed to trying to build a FieldOptions
object.
It also changes field types to constants. These are private for now, but
if we need to make them public, we should put them in the planner/types
package.
* Implement the "scale" value from Decimal(scale)
Also, precision and scale were currently reversed in the parser. This
fixes that.
* Modify the parser to handle CACHETYPE <type> SIZE <size>
It's a little odd to me that the cache type values are Tokens, but I
guess it's ok. One thing to keep in mind is that FeatureBase expects
lowercase values, so this commit changes the parser to set the value to
the lowercase version of the type.
* Fix the /sql2 tests
This entailed a combination of commenting out or t.Skip()-ing tests
which covered code in the parser that has been commented out or removed
as not currently supported in sql3.
It also adds some coverage for the sql.Contraint stringers.
* Prevent JSON sql results from containing closing commas
This commit just re-works the existing output code to avoid inserting
closing commas (which results in invalid JSON).
* Enhance the CREATE TABLE test coverage.
In particular, ensure that the fields which get created in FeatureBase
are what we expect based on the fields defined in the CREATE TABLE
statement.
This also ensures that the TIMEQUANTUM and CACHETYPE contraints are not
provided for the same field (since those constraints are not supported
together).
* Adjust the EBNF file to indicate SIZE contraint is optional
A CACHETYPE can be provided without a SIZE. This change indicates that
SIZE is optional.
* Remove `executionplanner_` from file names (#2040)
* implementation of ALTER TABLE (sans column RENAME)
* refactored expression analysis; added more robust type checking; all unary and bin ops function on ints
* added type support for expressions; full bin/unary op support; added cast; more literal support
* cast int to all other types
* all literals (except idset, stringset & timestamp) make it thru; cast to all types with int as source now works
* implemented LIKE/NOT LIKE
* Implemented IS [NOT] NULL
* Move sql2 files into sql3/parser package (#2045)
* Move sql2 files into sql3/parser package
This also removes the sql2 package.
* Fix tests which were typing _id fields as INT intead of ID
* implemented BETWEEN, NOT BETWEEN
* Add featurebase/error package (#2046)
* Add featurebase/error package
I copied the `dax/errors` package which I am starting to use in the DAX
prototype into `featurebase/errors` in order to start using it with the
sql3 package. It's basically a wrapper around `github.com/pkg/errors`,
but it uses a customer coded error.
The sql package can define its own errors based on the
`featurebase/errors` types. Then do things like `Wrap()` and `Is()`.
* Address the linter complaints: shadowed variables, unreachable code
* implemented IN & NOT IN with expression lists
* first cut of CASE
* Fixed some errors from rebase
* updated bnf; removed unused code; tightened up error handling
* first crack at basic CLI for SQL3
Use: `featurebase cli`
Still lots to do here, but for example:
> select count(*) from tremor
+--------------+
| COUNT |
+--------------+
| 1.158321e+06 |
+--------------+
* Iterate on the CLI (#2057)
Handle the errors.
Add an "exit" command.
Add some general formatting and white space.
Add termination character: ";" (semicolon)
This commit allows a user to provide multiple or partial SQL statements.
Example of multiple statements:
```
show tables; select * from foo;
```
Example of partial (multi-line) statements:
```
select *
from foo;
```
Don't uppercase the header values
* error refactoring; first cut of TOP; remove unused code; use log.Printf instead of fmt.Printf
* fixed a bug with QualifiedRef from refactoring; added bones of INSERT; removal of unused code; tightened up errors more; fixed failing tests
* single value list for INSERT
* Update bnf per discussion with Travis; INSERT now doing the requisite stuff
* Pat's eyes went square - nothing wrong with TOP, Pat needed to learn arrays again.
* improved some errors; fixed tests to suit
* send warnings back in the api; update CLI to display warnings
* start warning on stuff not implemented so we don't get bugged about it
* Tlt/sql experiment (#2063)
* Expresssion -> Expression
* Add SQL planner test
- adds a test to which it is easier to add tables and SQL statments
- un-exports all of the expression types
- removes the planner pointer from the expression types (it can be added
back later if need be)
* Fix where clause on a string field
Prior to this commit, the binary expression for a where clause on a
string field was building the call by providing a range operator which
is typically used for BSI fields. This changes it to use the call.Args
for string values.
* Update planner tests to handle multiple sql for the same results
* Reorganize SQL tests
Introduce a test/helpers package and move shared MustQueryRows into that
package.
* Add a compatibility map for field types. (#2064)
This is primarily to address the fact that ID fields were previously
incompatible with INT literals.
We should probably consider introducing a custom type for FieldType
which can be used to define compatibilities.
* significantly refactored type checking
* Handle nil (NULL) values in the sql CLI. (#2067)
go-pretty panics if the interface{} field value is nil. This replaces
nil values with a "NULL" string.
* Squash some commits
fixed a still failing test
added line, col to all error messages
refactored source handling to enable table aliases
fixed some copypasta per review
warnings for order by & topn; implemented select as a source
starting to handle in (select...); added stub for optimizer
JSON-encode the sql error and warning strings (#2069)
Error strings with unencoded characters (like double quotes) were
resulting in invalid json.
got insert working; added symbol table; added concrete optimizer; added nascent NestedLoopsOperator; rewrite "where foo in (select..." as inner join
* all about the sets (#2085)
* implemented setcontains()
* implemented set literal; insert set column values; setcontains/all/any both in expr eval and pql filters
* Convert test to use latest framework. (#2086)
* fixed some comments
* removed refactored tests
Co-authored-by: Travis Turner <travis@pilosa.com>
* Add support for Decimal fields to the sql test. (#2090)
* dates (#2094)
* return dates as strings in output; tightened up decimal type checking
* return dates as strings in output; tightened up decimal type checking
* fixed failing tests after decimal changes
* can now insert decimal values
* implemented insert for timestamp data type; implemented current_date, current_timestamp constants
* fixed some failing tests
* handle date literals from strings in insert statements
* changes from feedback
* Fix pointer method error
* sql3 API interface (#2110)
* Introduce API-related interfaces: SchemaAPI, ComputeAPI
The sql3 code was relying on the pointer: *pilosa.API in order to call
API methods directly on the local node. If we want to import and use the
sql3 package in another service (the DAX queryer, for example), we need
to be able to use an implementation of an interface for those API method
calls.
This commit introduces two interfaces, both automatically implemented by
pilosa.API:
- SchemaAPI
- ComputeAPI
* Convert sql3 code to use IndexInfo instead of Index
The sql3 code was relying on a *pilosa.Index and its methods to get
general information like index and field name, type, etc. This commit
converts everything to use a *pilosa.IndexInfo instead.
This allows us to modify the SchemaAPI interface to also return
IndexInfo instead of Index, which will be a lot easier to implement in a
non-pilosa package (like DAX); creating a *pilosa.Index requires
providing things like data directory paths and holders, which are not
necessary for these use cases.
* Unary and Binary Ops R US plus CAST (#2111)
* implemented string literal for timestamp epoch
* fixed failing test
* fixed the failing test again
* refactored tests; implemented unary op tests for all datatypes; implemented binop tests for int/int, int/id, int/decimal & ID/int
* implemented all binary ops for INT & all other types, ID & all other types
* implemented binary ops for DECIMAL types & all other types
* added STRING & BOOL to various tests; implemented all remaining binOp tests
* fix up some stuff after rebasing
* refactored test defs into multiple files; implemented CAST for every datatype
* added tests for like/not like
* addressed review feedback
* addressed type review feedback
* tightened up IS [NOT] NULL behavior plus tests (#2118)
* tightened up IS [NOT] NULL behavior plus tests
* BETWEEN/NOT BETWEEN with all data types
* addressed review feedback
* Handle negative integers in column min/max constraints (#2120)
This commit parses the min/max contraint as an expression, as opposed to
an int literal, so that negative values are treated as Unary
expressions.
There currently isn't support for min/max constraints on `decimal`
fiels, so for now this change only expects +/- integer values.
* Implement the CREATE TABLE keypartitions logic (#2123)
* Execution time, IN/NOT IN & multiple aggregates (#2124)
* added display of execution time
* IN/NOT IN tests for all data types
* fixed date parsing
* removed duplicative tests
* refactoring aggregates
* suport multiple aggregates
* Address review feedback
* final round of feedback
* Add method SchemaAPI.CreateIndexAndFields() (#2127)
In order to support a CREATE TABLE statement as a single command, this
commit alters the SchemaAPI interface to contain a single method which
handles both the index and its fields. It also updates the sql3 code to
use this interface instead of CreateIndex() and CreateField()
indepedently.
* Symbol Handling (Again) (#2129)
* Refactored symbol handling in the planner; re-instated the select as source tests
* removed commented out code
* addressing review feedback
* Move hard-coded _id field out of planner and into interface implementation (#2130)
This commit moves the hard-coded addition of the `_id` field from the
planner to the SchemaAPI.IndexInfo() implementation method.
NOTE: If anything was expecting SchemaAPI.Schema() to also return the
`_id` field as part of its field list in each table, then it would not
be there because the `_id` field is only added in the IndexInfo() method
for now. Currently that's not a problem because nothing is expecting the
`_id` field for `Schema()`.
* Multiple aggregates, all aggregates stand alone and in GROUP BY (#2132)
* handle multiple aggregates in group by queries
* added handling for avg() aggregate both stand alone and in group by
* tightened up sum & avg outside of group by
* added min, max & percentile
* added warnings
* Make MaterializedRowSet implement the PlanOperator interface. (#2133)
This commit refactors the PQLMultiGroupByOperator to have a PlanOperator
as its output. Then, when it initializes, it sets up a
MaterializedRowSet and populates that with the values from the multiple
group by operations.
* added explicit min/max pql operators
* saved a file I forgot to save
* per review
* Un-indent some if/else nesting (#2136)
Co-authored-by: Travis Turner <travis@pilosa.com>
* Add optional `name` argument to test structs.
This commit adds the `name` argument to `tableTest` and `sqlTest` so
that a test can be optionally named. This allows a developer to more
easily run/identify a particular test by name.
* Inbuilt functions (redux) (#2141)
* set functions type parameter type checking
* implemented datepart
* include SQL3 type in SHOW COLUMNS output
* fixed select as source; failing SHOW COLUMNS test
* select in select list
* dump output columns; handle optimization for select list subqueries
* make it an error to return multiple rows for a select list subquery
* added description
* contants and test coverage for datepart function
* SQL3 Refactor-palooza (#2182)
* removed unneeded IsAggregate()
* first cut of working nested loops operator aka INNER JOIN
* remove selectListItemPlanExpression
* added some warnings
* all the tests are passing again!
* addressed some linter complaints
* added basic order by
* bug fixes; added 'or replace'/'replace' to insert
* for insert references should return appropriately
* added back ability to use subquery singleton expressions
* removed dead code; fixed test
* json-able plan, Schema() plus refactoring
* fixed dumb code
* add some tests for time quantum behavior
* Code cleanup during review. Also fixed INSERT to keyed table bug.
This commit contains a lot of minor adjustments made during code review.
It also contains a bug fix that was preventing INSERT into a keyed table
(i.e. _id type STRING) from working.
Co-authored-by: Travis Turner <travis@molecula.com>
* Fix expected min/max on timestamp column test (decimal field)
I don't know why this changed, but presumably something to do with
decimal related work that happened on master.
* Fix compile problem after rebase
* review feedback
Co-authored-by: Matthew Jaffee <jaffee@pilosa.com>
Co-authored-by: Travis Turner <travis@pilosa.com>
Co-authored-by: Travis Turner <travis@molecula.com>
Co-authored-by: Fletcher Haynes <fletcher@capitalprawn.com>
golangci-lint is actually dependent on a specific not-quite
most recent version of golang.org/x/tools, fixing the dependency
is hard and requires changing one of the upstream packages,
just omitting the `-u` lets golangci-lint grab the version it
wants and use that.
The benchmarks take an absurdly long time to run, and I think these are the
largest offenders. Dropping to two concurrency cases 2 and 16 should give a
pretty good idea.
running
"make clustertests
DOCKER_COMPOSE=internal/clustertests/docker-compose-replication2.yml"
shows this issue (just remove the change in cluster.go).
Also removed two unrelated lines of code that appear to be doing absolutely nothing.
