Retry now starts the workflow over, and a local-folder run commits its
checkpoints, so the retry scenario checks that every stage commits again
under the retry's run id. The scenario for retrying without Git
checkpoints goes: local runs have them now, and the retry scenario
covers starting over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Checkpoints were only enabled for runs with a GitHub source, so local
folder runs, empty Local runs and dry runs stopped committing. `fabro
diff` then failed for them, and their checkpoint, run branch and diff
records disappeared from the event stream.
A run whose workspace is on the host now commits checkpoints there
again, without pushing, as on main. Docker and Daytona runs with no
GitHub source still record execution checkpoints without Git commits,
so a sandbox image without `git` cannot fail the run.
The scenario tests for crash recovery go back to asserting commits. A
workspace deleted while the run is down now fails the resumed run,
since the server keeps no copy to restore it from.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The worker minted one read token at launch and a fresh push token for
every checkpoint. The read token expired an hour into a run, so a
workspace acquired later fetched with a dead credential. Minting per
push put every push in GitHub's token-replication window, where a token
minted moments earlier is rejected with 404 "Repository not found".
The worker now keeps two InstallationTokenSource caches for the run, a
read-only one for fetches and a contents: write one for pushes. Each
fetch and push resolves through its source, which reuses one token until
it nears expiry and then mints the next. Petri's RunSource asks a
SourceCredentials provider on every fetch instead of holding a fixed
credential.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Share one credential header helper between the in-sandbox fetch and
the run branch push
- Keep only the target branch, goal, and model on the publisher instead
of a full run spec copy
- Load the worker's LLM catalog once, and mint the read token only when
the run checks something out
- Pass the source explicitly to checkpoint fetch helpers, dropping
unreachable branches, and reuse has_object in has_commit
- Move the run patch into the publication instead of cloning it, and
build it only when a publisher exists
- Add test fixture helpers for file sources and recording publishers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pushing the run branch and opening the pull request now happen in the
run's worker, in Fabro's run_finished hook, after the last stage and
before the run's terminal record, as the legacy publish step did. A
failed push or pull request fails the run with publish_failed instead of
leaving a warning on a run that already succeeded.
fabro-petri gains a RunPublisher the hooks call for a successful run with
its run branch, final commit, snapshot repository and patch; the worker's
GitHub publisher pushes from the snapshot repository with a push token it
mints at that moment, opens the pull request its settings ask for, and
records it. The worker resolves the server's GitHub credentials itself
for both the read-only checkout token and the push token, so the server
no longer hands it a clone credential or publishes after the run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the Petri cutover, a run with a GitHub target started in an empty
workspace, nothing pushed its run branch to GitHub, and nothing asked for
the automatic pull request when it succeeded.
Fabro's hooks now check a fresh run's GitHub target out inside the
sandbox when Petri hands them the scope, before the first stage: the
workspace fetches the selected commit, tag or branch at the run's clone
depth, with a read-only token the server resolves at each worker launch.
The worker scrubs the token from its environment at startup and presents
it only to the fetch, so it never lands in the repository or its remote.
The files belong to the sandbox user, so git accepts them.
The same checkout seeds the workspace's snapshot repository with the
starting commit. Checkpoint bundles from a shallow clone then import, a
stage's own commits never make a bundle carry the source's history, a
restore into a fresh sandbox fetches the base again and applies the run's
commits, and a fork carries the base with its checkpoints.
When a successful GitHub-target run ends, the server pushes its final
commit from the snapshot repository to fabro/run/<id> with its own write
credentials, then, when the run changed files and asks for one, records
the pull request request for the existing creation supervisor. A failed
push or request is a warning notice on the run. The manual pull request
endpoint shares the request step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Retry forked the source run at its last checkpoint and reran the failed
stage. It now creates a new run from the source's saved spec and starts
the workflow from the beginning in a fresh workspace, as retry did
before the Petri cutover. The new run records `retried_from` and no
`fork_source_ref`.
Retry no longer needs a checkpoint, a retained workspace, or a published
run branch, so it works for any terminal run that is not archived. To
continue from where a run stopped, fork it at a checkpoint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The store checks that captured bytes match their digest in every build,
hashing on a blocking thread, and the upload handler relies on that
check instead of hashing a second time.
- Capture bytes travel as `Bytes` from the hooks through the client and
the store, so uploads and retries share one buffer.
- The artifact writer takes the run ID from the hooks, so objects are
stored under the run their records name.
- Concurrent captures of the same file and content wait on one another,
so the file is uploaded and recorded once.
- When a record append fails, the hooks re-read the run's captures and
treat a record that did land as done, so a lost response does not
record the capture twice.
- An upload that finishes after its run was deleted removes itself,
instead of leaving an object nothing references.
- Listing a run's stage artifacts skips everything under `captures/`, so
an unexpected object there cannot fail the listing or the ZIP.
- The capture record derives its `digest` key from its source instead of
storing it twice, still writing and checking it on the wire.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Servers have always moved a local artifact store under the storage
directory at startup, whatever `local.root` said. Browser-wizard installs
write `local.root = "<storage>/objects"`, so honoring that root would move
their store and hide every artifact already written, with nothing to
migrate it. Restore the storage-directory override for local roots and
leave honoring custom roots to a change that migrates existing objects.
Installer metadata still goes through the override, so it lands where the
server reads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The artifact writer takes the digest the hooks already computed, so
captured bytes are hashed once on each side, and the dead integrity
error goes away.
- The writer is a required part of HooksSpec, not an optional field on
RunRequest, so a run with capture globs always has a writer and the
no-writer error goes away.
- ArtifactStore routes put/get and the capture methods through shared
put_at/get_at helpers.
- The upload handler parses the digest with parse_blob_hash_path before
any store reads, and builds its size-limit message from the constant.
- The default local artifact root comes from one helper used by both
config resolution and the storage-dir override.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Keep plugin-era Daytona lease fingerprints: read only DAYTONA_API_URL and
DAYTONA_ORGANIZATION_ID (no URL alias, no placement target), and stop
forwarding DAYTONA_SERVER_URL and DAYTONA_TARGET to the worker.
- Take the Docker fingerprint and network from this process's DOCKER_HOST,
the endpoint the Docker client actually connects to; make the provider
configuration's fields private.
- Return an error instead of panicking when Petri supplies no Host registry.
- Run deletion reads the Daytona key only for a Daytona run, and a forced
or restarted delete goes on when the secret store fails, as it does for
every other prune failure.
- Stop putting DAYTONA_API_KEY in the worker's environment; the worker reads
it from the vault. Give the worker's Daytona client the shared HTTP client.
- Fork, rewind and retry no longer read the vault: a fork acquires no sandbox.
- Remove the dead worker plugin forwarding and document that runs execute
only on the built-in providers.
- Build every Petri runtime through providers::standard_runtime or
bare_runtime, with a Clippy lint against Runtime::standard/bare.
- Share the Docker require-or-skip policy in fabro-test, tighten the Host
scope assertion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Load the Daytona key for fork and prune through one AppState method
instead of two copied vault reads, and pass the sandbox configuration
into runtime_spec rather than building it and overwriting it. The
worker reuses the CLI's process_env_var lookup.
Share one Docker availability check and the backend-requirement
variable through fabro-test, drop the built-in plugin path and pin
constants nothing reads any more, and let enabled_plugins() exclude the
bundled kinds itself. Refresh the comments and the spawn_env test that
still described built-in plugins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Register lazy Host, Docker, and Daytona factories for Petri execution,
fork, and prune. Share server provider configuration, preserve lease
fingerprints, and source Daytona credentials from the vault.
Remove built-in plugin setup and skip gates; add a release-mode worker
and prune regression to catch the failure that blocked nightly builds.
Co-Authored-By: Codex <noreply@openai.com>
Reduce the workspace Cargo.toml convention block to three lines: Lithos
libraries track `main`, Cargo.lock picks the commits (move one with
`cargo update -p <crate>`), and unmerged library work is tried with an
uncommitted `[patch]`. Drop the instruction to hand-review lockfile diffs
and trim the restatements in the pebble and petri comments, the
fabro-petri README and module doc, AGENTS.md, and the docker test doc.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every lithoscomputer git dependency (sandbox-driver, pebble, petri,
lithos-llm, twins) now uses `branch = "main"` instead of an exact rev,
matching the libraries, so the workspace resolves one Cargo source per
repository. Cargo.lock is the single place the commits are chosen; move
one with `cargo update -p <crate>`.
The lockfile keeps every commit except sandbox-driver, which moves from
583a164 to b30203c: Daytona removed its paginated sandbox listing, and
b30203c lists through cursors instead (it also moves the driver's
daytona-sdk-rust dependency to 0e69058). The Daytona auth-probe test
mocks now serve the cursor endpoint the driver calls.
CI reads the sandbox-driver commit for the plugin install from the
lockfile through cargo metadata instead of from Cargo.toml.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`lib/components/fabro-pebble-sandbox` moved into pebble as
`pebble_coding_agent::sandbox_driver` (lithoscomputer/pebble#27): the
`Environment` over a driver handle (`SandboxEnvironment`, was
`PebbleSandbox`), the `SandboxExec` policy, the port routes, and
`display_for_log`. The pebble pin moves to that branch head, 6d03b3b,
with the `sandbox-driver` feature on (`sandbox-driver-test-util` for the
server's tests, which take `MockSandbox` from pebble now). Nothing in the
crate was Fabro's by design; what was Fabro's stays: `SecretRedactor`
moves to `fabro-redact` as pebble's `Redactor` over `redact_string`, and
the log renderer takes it where a driver failure is rendered.
`fabro-petri` hands pebble types to Petri's crates, so Petri must pin the
same pebble revision: the petri pins move to lithoscomputer/petri#36
(9ee3f85), which pins pebble at the same head. Both re-pin to the pebble
merge commit together once #27 merges.
The 14 pebble commits between the pins fold the session projection's
lifetime tallies into `SessionProjection::totals` (and `PromptDelta`'s
into a flattened `totals`, which renames the prompt's `subagents` key to
`subagent_counts`, as the projection's already was). The stage progress
fold, the runs handler, the OpenAPI schema, the generated client model,
and the round-trip test follow.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A worker-backed run's in-memory managed run settled only when the
worker process exited. GET /runs/{id} reads the stored summary, which
the projector ends at Petri's own `run.finished` record, a moment
before the worker stores Fabro's terminal lifecycle record and exits.
The delete precheck prefers the managed run, so a delete issued in that
window was refused with 409 "cannot remove active run". Against a real
worker the window hit about six times in ten.
The server sees both records before they are stored: `run.finished` on
the coordinator log through the worker's records endpoint, and the
terminal lifecycle record through the platform-records endpoint. The
managed run now settles at either, ahead of the store, so the view
never reports the run ended while the managed run still says running.
The stream follower no longer reopens a settled run with the records
that precede its terminal one, and the worker's exit keeps the settled
status: it reaps the process, records a missing terminal record as it
did, and takes the store's status only when the store ended the run
differently. The mapping from Petri's finish to the run's status is the
projection's own, shared with its fold.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Docker recovery scenarios scraped the worker log for "sandbox
workspace brought to its durable snapshot"; since the host and sandbox
restores share one path, the line reads "workspace brought to its
durable snapshot" with the site as a field.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The include error names the partial relative to the run's working
directory, so its `../` run is as long as that directory is deep: eight
on this machine's temp dir, three on the CI runner's. Collapse the run
to a token before the snapshot compares.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The detached cancel test waited for the run's status to read `failed`
and then asserted on the stored `run.lifecycle` record. The projection
concludes the run from Petri's `run.finished` coordinator record, and
the worker stores the platform's terminal lifecycle record a moment
later, so the read raced the write and the assertion failed about once
in thirty runs. Wait for the record itself, and print the stored events
and the run state when the assertion fails.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The host_plugin_ and docker_plugin_ variants ran each scenario under
Fabro's old plugin transport with the provider kinds `host` and
`docker-plugin`, which Petri's Fabro frontend rejects. Under Petri every
provider is already served by a sandbox-driver plugin, so those variants
test nothing distinct. A single docker_ variant replaces them: an
environment with provider `docker` on buildpack-deps:noble, created on
an isolated server, skipping without the sandbox-driver-docker
executable or a daemon with the image unless
FABRO_REQUIRE_SANDBOX_PLUGINS is set.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Every Petri run takes its scope through a sandbox-driver plugin
executable that Petri finds on PATH, so the test jobs need
sandbox-driver-host and sandbox-driver-docker installed at the rev the
workspace pins. The three jobs share one from-source install through an
actions/cache entry keyed on the OS and the rev.
The Linux test job also pre-pulls Petri's default runner image, which
the suite's Docker scenarios leave to Petri: the plugin pulls it on
first use, but a 1 GiB pull inside a run's timeout is a flake.
The stdio plugin job was built for the deleted fabro-sandbox layer. It
becomes the Docker providers job: the `docker_` scenario variants and
the fabro-petri suite, with the fabro-sandbox and fabro-workflow steps
whose tests no longer exist removed.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A live-server scenario runs a one-stage workflow on Docker whose command
writes a file into the workspace, opens an Ask Fabro session on the
finished run, and sends one turn. The session attaches to the container
Petri created, stopped at the run's end, starts it again, and its tool
reads the file inside it; the turn succeeds, the tool's output and the
model's reply carry the file's content, and the twin's follow-up request
shows the model read it from the tool. Ask Fabro's tool policy is
read-only, so the shell tool is hidden from the model and refused; the
turn reads the file with the `read_file` tool, scripted on the twin,
instead of a shell `cat`.
The scenario skips, and says why, without the Docker plugin or a daemon,
as the other Docker scenarios do.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Nothing imports it any more: the Pebble glue lives in
fabro-pebble-sandbox, the server reaches run sandboxes through
sandbox_access, and Petri creates every run sandbox. The crate, its
test-support, its integration tests and every dependency edge go with
it. The `[server.sandbox.providers.<kind>.plugin]` settings stay: the
server still launches a plugin executable through them to attach to a
sandbox of a non-bundled kind.
AGENTS.md names the new crate and the direct-access pattern in place of
`RunSandbox`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Petri creates and owns every run sandbox through the sandbox driver, so
what Fabro still needs around a driver handle is the Pebble glue: the
Environment pebble's coding agent runs its tools through, the exec policy
(stop grace, working directory, StripAll, the termination mapping, the
redacted output tail), pebble's port routes over the driver's preview
URLs, the secret redactor, the path helpers, and a log rendering that
appends a failed command's redacted tail. This crate holds that glue,
moved from fabro-sandbox, over `Arc<dyn Sandbox>` plus a working
directory instead of `RunSandbox`, with a `MockSandbox` double behind
`test-support`.
`fabro exec` creates its host sandbox directly on the driver's Host
provider and activates it; Ask Fabro wraps the attached handle. Both
keep the provider alive beside the sandbox where the session's processes
are the provider's process groups.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Fabro's own DOT parser was left with one job after create-time compile
moved to Petri: walking a workflow's file references for the bundler and
the workflow-version store, and reading a name, a goal and two counts.
Petri's frontend parses the same language, so the parser goes and a small
crate reads the graph through Petri's.
`fabro-dot` is that crate: `WorkflowGraph::parse` over
`petri_frontend_attractor::dot` and its semantic model (defaults applied,
subgraphs flattened, chains expanded), `references(position)` as the one
walker over the static-reference vocabulary (each reference with its node
and position, file references checked to be template-free), and
`normalize_for_graphviz`, the re-emit of Fabro DOT with dotted attribute
keys quoted, which the SVG render needs. It sits beside `fabro-petri`
rather than inside it because `fabro-petri` depends on `fabro-workflow`,
which depends on `fabro-workflow-version`: the version store cannot reach
`fabro-petri` without a cycle, and the bundler should not pull the engine
in to read a graph.
Deleted: `fabro-graphviz`'s lexer, grammar, AST, semantic pass and
`parse_ast` (1,829 lines, plus the `nom` dependency); the DOT model in
`fabro-types::graph` (`Graph`, `Node`, `Edge`, `AttrValue`,
`shape_to_handler_type`), with only `ReferenceKind` kept, moved to
`fabro_types::reference`; `fabro-template`'s `visit_graph_references` and
the `GraphReference`/`GraphPosition` types, with the template-syntax rule
(`validate_static_reference`) kept there; the pull-request body's DOT
fallback summary, which was unreachable because the DOT source only
travels with the run spec whose display graph the summary already reads.
`fabro-graphviz` is now the render alone, over `fabro-dot`.
Parity: the old and new walkers were run over every `.fabro` and `.dot`
file in the repository (118) before the deletion. Every reference set is
identical. Five files differ in what Petri reads more correctly: a
backslash before a newline inside a quoted string is a line continuation
(four files, inline prompt text only), and a node named only by an edge
counts as a node (`test/edge_only_node.fabro`, 3 nodes rather than 2, so
the `fabro validate` snapshot moves). The checked-in bundles' shapes and
references are pinned by a snapshot in `fabro-dot`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The rest of the change whose deletions the previous commit carries (its
`git add` stopped at an already-removed path): `fabro_types::RunGraph`
and the `fabro-petri` builder that reads it off the admitted graph, the
server's create, validate, preflight and render paths on Petri's check
alone, the consumers moved to the new shape, the OpenAPI `RunGraph`
schemas with their parity tests, the regenerated TS client, and the
docs naming Petri's diagnostic codes.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Every run is admitted by Petri, whose check lowers imports, file
references, templates and the model stylesheet, lints the workflow and
pins its models. Fabro then re-parsed the same workflow through its own
legacy pipeline (parse, transforms, structural validation) only to fill
`RunSpec.graph` for the read side. That second pass is gone: the run's
display graph is `fabro_types::RunGraph`, built once in `fabro-petri`
from the admitted graph's metadata (the workflow name and goal from the
graph params; each declared stage's label and handler kind; one edge per
routing arm as written, lowering artifacts left out), and stored on the
spec at create beside the DOT as `graph_source`.
Deleted: `fabro-workflow`'s `pipeline`, `transforms`, `file_resolver`,
`operations::{source, validate}`, `run_materialization` and the legacy
`compile_admitted_run`; the server's `compile_admitted`, the structural
manifest pass, `preflight_model` and the model probe `run_llm_check`
(Petri's admission raises `attractor.model.unknown`); `fabro-graphviz`'s
stylesheet parser; most of `fabro_types::graph` (the DOT model keeps
what the bundler, version registration and template walker read). The
DOT parser stays for the bundler and the SVG render.
`POST /validate`, `POST /preflight`, `POST /graph/render`, `fabro
validate` and `fabro preflight` run on Petri's check alone, so their
diagnostics carry Petri's codes (`attractor.unbound_input`,
`unsupported.template.unbound_input`) where Fabro's
`template_undefined_variable` and `goal_self_reference` were. A refused
workflow's summary still names the DOT as written. The OpenAPI `RunSpec`
schema gains `RunGraph`, `RunGraphNode` and `RunGraphEdge`, reused from
`fabro-types` with parity tests; the TS client is regenerated.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The CLI artifact scenario seeded its run through the deleted upload
route; it now runs a real Petri workflow whose hooks collect the
artifacts, and the fabro artifact list and cp assertions read those.
A real command retry is not producible from a command node (a plain
failure or a timeout routes onward), so the retry dimension of the old
fixture goes; the stage, node, and retry filters, the tree copies, the
cross-stage ambiguity, and the filename collision stay covered. The
archive guard test drops its upload row (the blob write row covers an
octet-stream mutation). A dangling doc comment and two absolute paths
clippy flagged are fixed.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Each edge was checked with rg over the crate's sources outside its
test paths. fabro-cli keeps git2, regex, ulid, and shlex as
dev-dependencies for its integration tests. fabro-automation keeps
chrono, tokio, and tracing: its migrations compile into the crate
through #[path]. petri_testkit was already optional behind fabro-petri's
test-support feature and dual-listed as a dev-dependency. The workspace
loses the agent-client-protocol and AWS entries no crate references;
jsonschema stays for the fabro-api and fabro-tool tests. Cargo.lock
was refreshed by a plain build and only loses entries.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
GET /runs/{id}/checkpoint duplicated what /state serves; the hidden
fabro parse command had no user; records, run_status, outcome, and
usage_rollup in fabro-workflow only re-exported fabro_types. The
importers now name fabro_types directly. format_cost keeps its two
callers (the pull request body and the CLI stage display) and moves to
fabro_types::usage; the usage rollup tests move beside the function in
fabro-types, with test_usage in its test support.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A worker whose server is killed outright retried its control-stream
connect forever at a 5 s capped backoff, so it never finalized, never
stopped its sandbox, and lived until reboot. The worker now tracks the
start of each run of continuous connection failure and gives up after
60 s (10 s once its parent is pid 1), through the existing fatal
control-loss path that interrupts interviews and cancels the run. After
that fatal fires, the runner keeps driving the cancelled pipeline for a
bounded grace so `conclude` can stop the sandbox before the process
exits, instead of dropping the pipeline future mid-flight.
The test harness's stale-daemon reaper only matched `fabro server`
titles bound under `/tmp/.tmp*`, but `TestContext` roots are
`.ft-<label>-*` under `std::env::temp_dir()`, so daemons bound there
were never reaped. The regex now also matches sockets below a `.ft-`
directory component under any parent, and the unit test covers both
roots plus real-looking paths and `.ft-` outside a directory component.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Petri's Fabro frontend refused a bundle naming an environment it did not
declare and every MCP catalog reference, so the fixtures declared
`[environments.local]` and the server's catalogs never reached Petri.
Pin Petri at c874b86, where the frontend reads `[environments.<id>]` and
`[run.environment]` from every settings layer (bundle over project over the
host's layer, key by key), takes the environment a launch selected over the
layers, and resolves `[run.agent.mcps.<name>] id = "..."` against a catalog
the host binds. The server hands Petri its environment catalog as
`[environments.<id>]` tables of the settings layer it already passes, the
intent's environment as the launch's selection (`Launch::environment`, as
the intent overrides the bundle in Fabro's own resolution), and its MCP
catalog as `RuntimeSpec::mcp_catalog_toml`, one inline entry per definition
keyed by id. Offline validation hands Petri the seeded catalog the same
way, so `fabro validate` accepts `[run.environment] id = "local"`.
The fixtures drop the `[environments.local]` tables they carried for this;
the secrets test keeps its own, on purpose. Scenario tests cover a bundle
naming a catalog environment (its image lowered, and run on Docker when the
plugin and a daemon are there), a bundle's own table winning key by key,
the server refusing an unknown environment before Petri, and a catalog MCP
reference whose tool the agent session lists (an echo server under
`test/mcp/`).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The worker control bus was publish-only: the steer and interrupt
endpoints answered 202 once the control was forwarded, and a refusal
showed up only later as a `run.notice` on the run's stream.
A steer or an interrupt now carries a request id. The worker answers it
over the control stream it arrived on with `{request_id, outcome}`,
where the outcome is `delivered` (with the stage's label) or `refused`
(with the code and the reason). The server keeps the outstanding
requests in a registry and waits up to 5 s for the answer: the endpoint
answers 202 `{"outcome":"delivered","stage":…}`, 409 with the refusal's
code (`no_live_turn`, `no_such_stage`, `steer_refused`,
`interrupt_refused`) and message, or 202 `{"outcome":"pending"}` when
the worker gave no answer in time. The `run.notice` record on refusal
stays, under the same code, so a steer to a stage that is not running is
now `no_such_stage` there too. Pause and unpause are unchanged.
The in-process test path answers a steer or an interrupt from the run's
own controls at once. `FABRO_TEST_CONTROL_ACKS_MUTED=1` on the server
mutes the worker's answers, so a test can see the pending fallback.
`fabro steer` prints the worker's answer, and a refusal is its error.
The OpenAPI spec documents the 202 body and the 409 codes; the Rust and
TypeScript clients are regenerated.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Through a real server and its worker: a three-stage run forked at its
first stage continues with the other two on the first stage's restored
file and commits on the new run branch after the source's commits; a
retry of a run whose last stage failed transiently reruns that stage and
succeeds; a rewind archives and supersedes its source, and an archived
run is refused; the timeline lists every checkpoint record with its
commit; a fork at a checkpoint inside a parallel branch is refused and
creates nothing, while one after the join continues.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
`fabro timeline <run>` prints the checkpoint table (or JSON); `fabro fork
<run> [target]` and `fabro rewind <run> <target>` make and start the new
run and name it, `--list` showing the timeline instead; `fabro retry
<run>` starts the retry and prints its id. The top-level help snapshot
and the generated CLI reference follow.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The worker's `run.notice` for an interrupt it could not deliver now reads
"Interrupt of stage `gate` refused: the stage has no model turn to
interrupt" (or "Interrupt refused: …" when the control named no stage),
so the web and the CLI can show which stage and why, with the reason as
Petri's `ControlError` spells it. The gate scenario asserts both messages.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
