fix: forward task configuration through stdin-prompt-stream protocol
The stdin-prompt-stream `start` command only accepted `prompt` — any
`configuration` passed via the cloud worker's StartNewTask was silently
dropped. This meant custom modes (e.g. `ask-artifacts`), disabled tools,
and other task-level settings never reached the extension when running
via the CLI harness.
Changes:
- Add optional `configuration` field to the `start` stdin command
- Parse and forward it in `runStdinStreamMode`
- Thread it through `ExtensionHost.runTask` → `newTask` webview message
→ `ClineProvider.createTask` (which already calls `setValues`)
- Add `taskConfiguration` field to `WebviewMessage` type
Backward-compatible: older CLIs ignore the extra field; older workers
that don't send `configuration` trigger no change in behavior.
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: cte <cestreich@gmail.com>
* fix(cli): streaming deltas, task ID propagation, cancel recovery, and misc fixes
- Stream tool_use ask messages (command, tool, mcp) as structured deltas
instead of full snapshots in json-event-emitter
- Generate task ID upfront and propagate through runTask/createTask so
currentTaskId is available in extension state immediately
- Wait for resumable state after cancel before processing follow-up
messages to prevent race conditions in stdin-stream
- Add ROO_CODE_DISABLE_TELEMETRY=1 env var to disable cloud telemetry
- Provide valid empty JSON Schema for custom tools without parameters
to fix strict-mode API validation
- Skip paths outside cwd in RooProtectedController to avoid RangeError
- Silently handle abort during exponential backoff retry countdown
- Enable customTools experiment in extension host
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add start() to TaskStub in single-open-invariant test
The ClineProvider.createTask change to call task.start() after
addClineToStack requires the test's TaskStub mock to have this method.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
When the CLI is configured with the Roo provider, proactively fetch
and warm the model list during activation so that model information
is available before the first prompt is sent. The warmup has a 10s
timeout and failures are logged only in debug mode so they never
block normal operation.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat: restore Unbound as a provider
* Adds translations
* fix: add unbound to ClineProvider test expectations
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(cli): add NDJSON stdin protocol, list subcommands, and modularize run.ts
Overhaul the stdin prompt stream from raw text lines to a structured NDJSON
command protocol (start/message/cancel/ping/shutdown) with requestId
correlation, ack/done/error lifecycle events, and queue telemetry. Add list
subcommands (commands, modes, models) for programmatic discovery. Extract
stdin stream logic from run.ts into stdin-stream.ts and add shared isRecord
guard utility. Includes unit tests for all new modules.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(core): fix Task.ts bug affecting CLI operation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(web): add blog section with 4 initial posts
Implements MKT-66 through MKT-74:
Content Layer (MKT-67):
- Markdown files in src/content/blog with Zod-validated frontmatter
- Pacific Time scheduling evaluated at request-time (no deploy needed)
- gray-matter for parsing, react-markdown + remark-gfm for rendering
Blog Pages (MKT-68, MKT-69):
- Index page at /blog with dynamic SSR
- Post page at /blog/[slug] with dynamic SSR
- Breadcrumb navigation and prev/next post navigation
SEO (MKT-70):
- Full OpenGraph and Twitter card metadata
- Schema.org JSON-LD (Article, BreadcrumbList, CollectionPage)
- Canonical URLs pointing to roocode.com/blog
Analytics (MKT-74):
- PostHog blog_post_viewed and blog_index_viewed events
- Referrer tracking for attribution
Navigation (MKT-72):
- Updated nav-bar and footer to link to internal /blog
- Blog link in Resources dropdown
Sitemap (MKT-71):
- Dynamic blog paths with PT scheduling check
Initial Posts:
- PRDs Are Becoming Artifacts of the Past (Jan 12)
- Code Review Got Faster, Not Easier (Jan 19)
- Vibe Coders Build and Rebuild (Jan 26)
- Async Agents Change the Speed vs Quality Calculus (Feb 2)
* fix(test): update HistoryPreview tests to match refactored component
The HistoryPreview component was refactored to use useGroupedTasks and
TaskGroupItem instead of rendering TaskItem directly. This updates the
test file to properly mock the new dependencies:
- Mock useGroupedTasks hook to provide grouped task data
- Mock TaskGroupItem instead of TaskItem
- Update assertions to test for task groups instead of individual tasks
* feat(blog): add Vercel-inspired patterns and Tone of Voice alignment
- Add reading time display to blog posts
- Create BlogPostCTA component with 4 variants (default, extension, cloud, enterprise)
- Add zebra striping to tables in blog posts
- Add CTA to blog landing and paginated pages
- Remove 'Posted' prefix from dates
- Update blog description: 'How teams use agents to iterate, review, and ship PRs with proof'
- Add BlogPostList and BlogPagination components
- Add 100+ new blog posts from content pipeline
* feat(blog): add source badges for podcast content (Office Hours, After Hours, Roo Cast)
- Add BlogSource type to types.ts
- Export BlogSource from blog index
- Add SourceBadge component to BlogPostList with colored badges
- Each podcast has distinct color: blue (Office Hours), purple (After Hours), emerald (Roo Cast)
* feat(blog): add source field to all blog posts (Roo Cast, Office Hours, After Hours)
- Add add-blog-sources.ts script to build title→source mapping
- Updated 122 blog posts with correct podcast sources
- Sources: Roo Cast (52), Office Hours (62), After Hours (8)
* feat(blog): add source badges with consistent styling
- Add source field to Zod validation schema
- Source badges use same styling as tag badges (rounded, greyscale)
- Badges display on /blog landing page for Office Hours, After Hours, Roo Cast
* feat(blog): improve schema.org structured data for SEO
- Change @type from Article to BlogPosting (more specific)
- Add image property using OG image URL
- Add wordCount for AEO optimization
* feat(blog): timestamped YouTube quotes + attribution polish
* chore(blog): update 'Series A team' to 'Series A - C team' and fix 'Tovin' to 'Tovan'
- Changed 22 instances of 'Series A team' to 'Series A - C team' across 20 blog posts
- Changed 12 instances of 'Tovin' to 'Tovan' across 4 blog posts
This broadens the messaging to better represent teams that Roo Code serves (Series A through C).
* ci: retry CI after timeout
* blog: featured posts + copy edits
* blog: remove draft posts from web content
* fix(blog): loop HTML tag stripping to prevent incomplete sanitization
The single-pass .replace(/<[^>]+>/g, "") in calculateReadingTime() was
flagged by CodeQL as vulnerable to incomplete multi-character sanitization.
Input like "<scr<script>ipt>" would still contain "<script" after one pass.
Added a stripHtmlTags() helper that loops the replacement until stable,
plus a final pass to remove any remaining angle brackets.
* fix(blog): replace iterative HTML tag stripping with single-pass angle bracket removal
The CodeQL scanner flagged the iterative stripHtmlTags function for
incomplete multi-character sanitization. The regex /<[^>]+>/g only
matches complete tags, so partial fragments like <script (without a
closing >) could survive intermediate loop iterations.
Since this function is only used for word counting in
calculateReadingTime, replace the multi-step approach with a simple
single-pass removal of all < and > characters. This eliminates the
incomplete sanitization pattern entirely.
---------
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Michael Preuss <michael@roocode.com>
* Add stdin stream mode for the cli
* fix: clear jsonEmitter state between tasks in stdin-prompt-stream mode
* fix: use consistent user role for prompt echo partials in stream-json mode
---------
Co-authored-by: Roo Code <roomote@roocode.com>
* fix: correct Bedrock model ID for Claude Opus 4.6 (#11232)
Remove the :0 suffix from the Claude Opus 4.6 model ID to match
the correct AWS Bedrock model identifier.
The model ID was "anthropic.claude-opus-4-6-v1:0" but should be
"anthropic.claude-opus-4-6-v1" per AWS Bedrock documentation.
Fixes#11231
Co-authored-by: Roo Code <roomote@roocode.com>
* fix: guard against empty-string baseURL in provider constructors (#11233)
When the 'custom base URL' checkbox is unchecked in the UI, the setting
is set to '' (empty string). Providers that passed this directly to their
SDK constructors caused 'Failed to parse URL' errors because the SDK
treated '' as a valid but broken base URL override.
- gemini.ts: use || undefined (was passing raw option)
- openai-native.ts: use || undefined (was passing raw option)
- openai.ts: change ?? to || for fallback default
- deepseek.ts: change ?? to || for fallback default
- moonshot.ts: change ?? to || for fallback default
Adds test coverage for Gemini and OpenAI Native constructors verifying
empty-string baseURL is coerced to undefined.
* fix: make defaultTemperature required in getModelParams to prevent silent temperature overrides (#11218)
* fix: DeepSeek temperature defaulting to 0 instead of 0.3
Pass defaultTemperature: DEEP_SEEK_DEFAULT_TEMPERATURE to getModelParams() in
DeepSeekHandler.getModel() to ensure the correct default temperature (0.3)
is used when no user configuration is provided.
Closes#11194
* refactor: make defaultTemperature required in getModelParams
Make the defaultTemperature parameter required in getModelParams() instead
of defaulting to 0. This prevents providers with their own non-zero default
temperature (like DeepSeek's 0.3) from being silently overridden by the
implicit 0 default.
Every provider now explicitly declares its temperature default, making the
temperature resolution chain clear:
user setting → model default → provider default
---------
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
* feat: batch consecutive tool calls in chat UI with shared utility (#11245)
* feat: group consecutive list_files tool calls into single UI block
Consolidate consecutive listFilesTopLevel/listFilesRecursive ask messages
into a single 'Roo wants to view multiple directories' block, matching the
existing read_file batching pattern.
* chore: add missing translation keys for all locales
* refactor: consolidate duplicate listFiles batch-handling blocks in ChatRow
Merge the separate listFilesTopLevel and listFilesRecursive case blocks
into a single combined case with shared batch-detection logic, selecting
the icon and translation key based on the tool type. This removes the
duplicated isBatchDirRequest check and BatchListFilesPermission render.
* feat: batch consecutive file-edit tool calls into single UI block
Add edit-file batching in ChatView groupedMessages that consolidates
consecutive editedExistingFile, appliedDiff, newFileCreated,
insertContent, and searchAndReplace asks into a single BatchDiffApproval
block. Move batchDiffs detection in ChatRow above the switch statement
so it applies to any file-edit tool type.
* refactor: extract batchConsecutive utility, fix batch UI issues
- Extract generic batchConsecutive() utility from 3 identical while-loops
- Fix React key collisions in BatchListFilesPermission, BatchFilePermission, BatchDiffApproval
- Normalize language prop to "shellsession" (was "shell-session" for top-level)
- Remove unused _batchedMessages property from synthetic messages
- Remove dead didViewMultipleDirectories i18n key from all 18 locale files
- Add batch button text for listFilesTopLevel/listFilesRecursive
- Add batchConsecutive utility tests (6 cases)
* fix: audit improvements for batch tool-call UI
- Make batchConsecutive() generic instead of ClineMessage-specific
- Add batch-aware button text for edit-file batches ("Save All"/"Deny All")
- Add dedicated list-batch/edit-batch i18n keys (stop reusing read-batch)
- Add JSON.parse defense-in-depth in all three synthesizers
- Fix mixed list_files batch icon to default to FolderTree
- Add 6 missing test cases (all-match, immutability, spy, single-dir)
* chore: minor type cleanup (out-of-scope housekeeping)
- Trim unused recursive/isOutsideWorkspace from DirPermissionItem interface
- Remove 4 pre-existing `as any` casts in ChatView.tsx:
- window cast → precise inline type
- checkpoint bracket access → removed unnecessary casts
- condensing message → `as ClineMessage`
- debounce cancel → `.clear()` (correct API)
- Update BatchListFilesPermission test data to match trimmed interface
* i18n: add list-batch and edit-batch translations for all locales
* feat: add IPC query handlers for commands, modes, and models (#11279)
Add GetCommands, GetModes, and GetModels to the IPC protocol so external
clients can fetch slash commands, available modes, and Roo provider models
without going through the internal webview message channel.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add lock toggle to pin API config across all modes in workspace (#11295)
* feat: add lock toggle to pin API config across all modes in workspace
Add a lock/unlock toggle inside the API config selector popover (next to
the settings gear) that, when enabled, applies the selected API
configuration to all modes in the current workspace.
- Add lockApiConfigAcrossModes to ExtensionState and WebviewMessage types
- Store setting in workspaceState (per-workspace, not global)
- When locked, activateProviderProfile sets config for all modes
- Lock icon in ApiConfigSelector popover bottom bar next to gear
- Full i18n: English + 17 locale translations (all mention workspace scope)
- 9 new tests: 2 ClineProvider, 2 handler, 5 UI (77 total pass)
* refactor: replace write-fan-out with read-time override for lock API config
The original lock implementation used setModeConfig() fan-out to write the
locked config to ALL modes globally. Since the lock flag lives in workspace-
scoped workspaceState but modeApiConfigs are in global secrets, this caused
cross-workspace data destruction.
Replaced with read-time guards:
- handleModeSwitch: early return when lock is on (skip per-mode config load)
- createTaskWithHistoryItem: skip mode-based config restoration under lock
- activateProviderProfile: removed fan-out block
- lockApiConfigAcrossModes handler: simplified to flag + state post only
- Fixed pre-existing workspaceState mock gap in ClineProvider.spec.ts and
ClineProvider.sticky-profile.spec.ts
* fix: validate Gemini thinkingLevel against model capabilities and handle empty streams (#11303)
* fix: validate Gemini thinkingLevel against model capabilities and handle empty streams
getGeminiReasoning() now validates the selected effort against the model's
supportsReasoningEffort array before sending it as thinkingLevel. When a
stale settings value (e.g. 'medium' from a different model) is not in the
supported set, it falls back to the model's default reasoningEffort.
GeminiHandler.createMessage() now tracks whether any text content was
yielded during streaming and handles NoOutputGeneratedError gracefully
instead of surfacing the cryptic 'No output generated' error.
* fix: guard thinkingLevel fallback against 'none' effort and add i18n TODO
The array validation fallback in getGeminiReasoning() now only triggers
when the selected effort IS a valid Gemini thinking level but not in
the model's supported set. Values like 'none' (explicit no-reasoning
signal) are no longer overridden by the model default.
Also adds a TODO for moving the empty-stream message to i18n.
* fix: track tool_call_start in hasContent to avoid false empty-stream warning
Tool-only responses (no text) are valid content. Without this,
agentic tool-call responses would incorrectly trigger the empty
response warning message.
* chore(cli): prepare release v0.0.53 (#11425)
* feat: add GLM-5 model support to Z.ai provider (#11440)
* chore: regenerate pnpm-lock.yaml
* fix: resolve type errors and remove AI SDK test contamination
* docs: update progress.txt with rebuilt Batch 2 status
---------
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
Co-authored-by: Chris Estreich <cestreich@gmail.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add image content support to MCP tool responses (#10874)
Co-authored-by: Roo Code <roomote@roocode.com>
* fix: transform tool blocks to text before condensing (EXT-624) (#10975)
* refactor(read_file): Codex-inspired read_file refactor EXT-617 (#10981)
* feat: allow import settings in initial welcome screen (#10994)
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Matt Rubens <mrubens@users.noreply.github.com>
* fix(code-index): remove deprecated text-embedding-004 and migrate to gemini-embedding-001 (#11038)
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Hannes Rudolph <hrudolph@gmail.com>
* chore: treat extension .env as optional (#11116)
* fix: sanitize tool_use_id in tool_result blocks to match API history (#11131)
Tool IDs from providers like Gemini/OpenRouter contain special characters
(e.g., 'functions.read_file:0') that are sanitized when saving tool_use
blocks to API history. However, tool_result blocks were using the original
unsanitized IDs, causing ToolResultIdMismatchError.
This fix ensures tool_result blocks use sanitizeToolUseId() to match the
sanitized tool_use IDs in conversation history.
Fixes EXT-711
* fix: queue messages during command execution instead of losing them (#11140)
* IPC fixes for task cancellation and queued messages (#11162)
* feat: add support for AGENTS.local.md personal override files (#11183)
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
* fix(cli): resolve race condition causing provider switch during mode changes (#11205)
When using slash commands with `mode:` frontmatter (e.g., `/cli-release`
with `mode: code`), the CLI would fail with "Could not resolve
authentication method" from the Anthropic SDK, even when using a
non-Anthropic provider like `--provider roo`.
Root cause: In `markWebviewReady()`, the `webviewDidLaunch` message was
sent before `updateSettings`, creating a race condition. The
`webviewDidLaunch` handler's "first-time init" sync would read
`getState()` before CLI-provided settings were applied to the context
proxy. Since `getState()` defaults `apiProvider` to "anthropic" when
unset, this default was saved to the provider profile. When a slash
command triggered `handleModeSwitch()`, it found this corrupted profile
with `apiProvider: "anthropic"` (but no API key) and activated it,
overwriting the CLI's working roo provider configuration.
Fix:
1. Reorder `markWebviewReady()` to send `updateSettings` before
`webviewDidLaunch`, ensuring the context proxy has CLI-provided
values when the initialization handler runs.
2. Guard the first-time init sync with `checkExistKey(apiConfiguration)`
to prevent saving a profile with only the default "anthropic"
fallback and no actual API keys configured.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* chore: remove dead toolFormat code from getEnvironmentDetails (#11207)
Remove the toolFormat constant and <tool_format> line from environment
details output. Native tool calling is now the only supported protocol,
making this code unnecessary.
Fixes#11206
Co-authored-by: Roo Code <roomote@roocode.com>
* feat: extract translation and merge resolver modes into reusable skills (#11215)
* feat: extract translation and merge resolver modes into reusable skills
- Add roo-translation skill with comprehensive i18n guidelines
- Add roo-conflict-resolution skill for intelligent merge conflict resolution
- Add /roo-translate slash command as shortcut for translation skill
- Add /roo-resolve-conflicts slash command as shortcut for conflict resolution skill
The existing translate and merge-resolver modes are preserved. These new skills
and commands provide reusable access to the same functionality.
Closes CLO-722
* feat: add guidances directory with translator guidance file
- Add .roo/guidances/roo-translator.md for brand voice, tone, and word choice guidance
- Update roo-translation skill to reference the guidance file
The guidance file serves as a placeholder for translation style guidelines
that will be interpolated at runtime.
* fix: rename guidances directory to guidance (singular)
* fix: remove language-specific section from translator guidance
The guidance file should focus on brand voice, tone, and word choice only.
* fix: remove language-specific guidelines section from skill file
* Update .roo/skills/roo-translation/SKILL.md
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
---------
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Bruno Bergher <bruno@roocode.com>
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
* feat: add Claude Opus 4.6 support across all providers (#11224)
* feat: add Claude Opus 4.6 support across all providers
Add Claude Opus 4.6 (claude-opus-4-6) model definitions and 1M context
support across Anthropic, Bedrock, Vertex AI, OpenRouter, and Vercel AI
Gateway providers.
- Anthropic: 128K max output, /5 pricing, 1M context tiers
- Bedrock: anthropic.claude-opus-4-6-v1:0 with 1M context + global inference
- Vertex: claude-opus-4-6 with 1M context tiers
- OpenRouter: prompt caching + reasoning budget sets
- Vercel AI Gateway: Opus 4.5 and 4.6 added to capability sets
- UI: 1M context checkbox for Opus 4.6 on all providers
- i18n: Updated 1M context descriptions across 18 locales
Also adds Opus 4.5 to Vercel AI Gateway (previously missing) and
OpenRouter maxTokens overrides for Opus 4.5/4.6.
Closes#11223
* fix: apply tier pricing when 1M context is enabled on Bedrock
When awsBedrock1MContext is enabled for tiered models like Opus 4.6,
also apply the 1M tier pricing (inputPrice, outputPrice, cache prices)
instead of only updating contextWindow. This ensures cost calculations
and UI display use the correct >200K rates.
* feat: add gpt-5.3-codex model to OpenAI Codex provider (#11225)
feat: add gpt-5.3-codex model and make it default for OpenAI Codex provider
Co-authored-by: Roo Code <roomote@roocode.com>
* fix: prevent parent task state loss during orchestrator delegation (#11281)
* fix: make removeClineFromStack() delegation-aware to prevent orphaned parent tasks (#11302)
* fix: make removeClineFromStack() delegation-aware to prevent orphaned parent tasks
When a delegated child task is removed via removeClineFromStack() (e.g., Clear
Task, navigate to history, start new task), the parent task was left orphaned
in "delegated" status with a stale awaitingChildId. This made the parent
unresumable without manual history repair.
This fix captures parentTaskId and childTaskId before abort/dispose, then
repairs the parent metadata (status -> active, clear awaitingChildId) when
the popped task is a delegated child and awaitingChildId matches.
Parent lookup + updateTaskHistory are wrapped in try/catch so failures are
non-fatal (logged but do not block the pop).
Closes#11301
* fix: add skipDelegationRepair opt-out to removeClineFromStack() for nested delegation
---------
Co-authored-by: Roo Code <roomote@roocode.com>
* fix(reliability): prevent webview postMessage crashes and make dispose idempotent (#11313)
* fix(reliability): prevent webview postMessage crashes and make dispose idempotent
Closes: #11311
1. postMessageToWebview() now catches rejections from
webview.postMessage() so that messages sent after the webview is
disposed do not surface as unhandled promise rejections.
2. dispose() is guarded by a _disposed flag so that repeated calls
(e.g. during rapid extension deactivation) are no-ops.
3. CloudService mock in ClineProvider.spec.ts updated to include
off() — a pre-existing gap exposed by the new dispose test.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add early _disposed check in postMessageToWebview
Skip the postMessage call entirely when the provider is already disposed,
avoiding unnecessary try/catch execution. Added test coverage for this path.
* chore: trigger CI
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
* fix: resolve race condition in new_task delegation that loses parent task history (#11331)
* fix: resolve race condition in new_task delegation that loses parent task history
When delegateParentAndOpenChild creates a child task via createTask(), the
Task constructor fires startTask() as a fire-and-forget async call. The child
immediately begins its task loop and eventually calls saveClineMessages() →
updateTaskHistory(), which reads globalState, modifies it, and writes back.
Meanwhile, delegateParentAndOpenChild persists the parent's delegation
metadata (status: 'delegated', delegatedToId, awaitingChildId, childIds) via
a separate updateTaskHistory() call AFTER createTask() returns.
These two concurrent read-modify-write operations on globalState race: the
last writer wins, overwriting the other's changes. When the child's write
lands last, the parent's delegation fields are lost, making the parent task
unresumable when the child finishes.
Fix: create the child task with startTask: false, persist the parent's
delegation metadata first, then manually call child.start(). This ensures
the parent metadata is safely in globalState before the child begins writing.
* docs: clarify Task.start() only handles new tasks, not history resume
* fix: serialize taskHistory writes and fix delegation status overwrite race (#11335)
Add a promise-chain mutex (withTaskHistoryLock) to serialize all
read-modify-write operations on taskHistory, preventing concurrent
interleaving from silently dropping entries.
Reorder reopenParentFromDelegation to close the child instance
before marking it completed, so the abort path's stale 'active'
status write no longer overwrites the 'completed' state.
Covered by new tests: RPD-04/05/06, UTH-02/04, and a full mutex
concurrency suite.
* Fix task resumption in the API module (#11369)
* chore: clean up repo-facing mode rules (#11410)
* fix: add maxReadFileLine to ExtensionState type for webview compatibility
---------
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Daniel <57051444+daniel-lxs@users.noreply.github.com>
Co-authored-by: Matt Rubens <mrubens@users.noreply.github.com>
Co-authored-by: Chris Estreich <cestreich@gmail.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Bruno Bergher <bruno@roocode.com>
Co-authored-by: 0xMink <dennis@dennismink.com>
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
* fix: cancel backend auto-approval timeout when auto-approve is toggled off mid-countdown (#11439)
Co-authored-by: Sannidhya <sann@Sannidhyas-MacBook-Pro.local>
* fix: prevent chat history loss during cloud/settings navigation (#11371) (#11372)
Co-authored-by: Sannidhya <sann@Sannidhyas-MacBook-Pro.local>
* fix: preserve pasted images in chatbox during chat activity (#11375)
Co-authored-by: Roo Code <roomote@roocode.com>
* fix: resolve chat scroll anchoring and task-switch scroll race condit… (#11385)
* fix: avoid zsh process-substitution false positives in assignments (#11365)
* fix(editor): make tab close best-effort in DiffViewProvider.open (#11363)
* fix(checkpoints): canonicalize core.worktree comparison to prevent Windows path mismatch failures (#11346)
* fix: prevent double notification sound playback (#11283)
* fix: prevent false unsaved changes prompt with OpenAI Compatible headers (#8230) (#11334)
fix: prevent false unsaved changes prompt with OpenAI Compatible headers
Mark automatic header syncs in ApiOptions and OpenAICompatible as
non-user actions (isUserAction: false) and enhance SettingsView change
detection to skip automatic syncs with semantically equal values.
Root cause: two components (ApiOptions and OpenAICompatible) manage
openAiHeaders state and automatically sync it back on mount/remount.
These syncs were treated as user changes, triggering a false dirty state.
Co-authored-by: Robert McIntyre <robertjmcintyre@users.noreply.github.com>
* fix: remove noisy console.warn logs from NativeToolCallParser (#11264)
Remove two console.warn messages that fire excessively when loading tasks
from history:
- 'Attempting to finalize unknown tool call' in finalizeStreamingToolCall()
- 'Received chunk for unknown tool call' in processStreamingChunk()
The defensive null-return behavior is preserved; only the log output is removed.
* refactor: remove footgun prompting (file-based system prompt override) (#11387)
* refactor: delete orphaned per-provider caching transform files (#11388)
* feat: add disabledTools setting to globally disable native tools (#11277)
* feat: add disabledTools setting to globally disable native tools
Add a disabledTools field to GlobalSettings that allows disabling specific
native tools by name. This enables cloud agents to be configured with
restricted tool access.
Schema:
- Add disabledTools: z.array(toolNamesSchema).optional() to globalSettingsSchema
- Add disabledTools to organizationDefaultSettingsSchema.pick()
- Add disabledTools to ExtensionState Pick type
Prompt generation (tool filtering):
- Add disabledTools to BuildToolsOptions interface
- Pass disabledTools through filterSettings to filterNativeToolsForMode()
- Remove disabled tools from allowedToolNames set in filterNativeToolsForMode()
Execution-time validation (safety net):
- Extract disabledTools from state in presentAssistantMessage
- Convert disabledTools to toolRequirements format for validateToolUse()
Wiring:
- Add disabledTools to ClineProvider getState() and getStateToPostToWebview()
- Pass disabledTools to all buildNativeToolsArrayWithRestrictions() call sites
EXT-778
* fix: check toolRequirements before ALWAYS_AVAILABLE_TOOLS
Moves the toolRequirements check before the ALWAYS_AVAILABLE_TOOLS
early-return in isToolAllowedForMode(). This ensures disabledTools
can block always-available tools (switch_mode, new_task, etc.) at
execution time, making the validation layer consistent with the
filtering layer.
* feat: add support for .agents/skills directory (#11181)
* feat: add support for .agents/skills directory
This change adds support for discovering skills from the .agents/skills
directory, following the Agent Skills convention for sharing skills
across different AI coding tools.
Priority order (later entries override earlier ones):
1. Global ~/.agents/skills (shared across AI coding tools, lowest priority)
2. Project .agents/skills
3. Global ~/.roo/skills (Roo-specific)
4. Project .roo/skills (highest priority)
Changes:
- Add getGlobalAgentsDirectory() and getProjectAgentsDirectoryForCwd()
functions to roo-config
- Update SkillsManager.getSkillsDirectories() to include .agents/skills
- Update SkillsManager.setupFileWatchers() to watch .agents/skills
- Add tests for new functionality
* fix: clarify skill priority comment to match actual behavior
* fix: clarify skill priority comment to explain Map.set replacement mechanism
---------
Co-authored-by: Roo Code <roomote@roocode.com>
* feat(history): render nested subtasks as recursive tree (#11299)
* feat(history): render nested subtasks as recursive tree
* fix(lockfile): resolve missing ai-sdk provider entry
* fix: address review feedback — dedupe countAll, increase SubtaskRow max-h
- HistoryView: replace local countAll with imported countAllSubtasks from types.ts
- SubtaskRow: increase nested children max-h from 500px to 2000px to match TaskGroupItem
* perf(refactor): consolidate getState calls in resolveWebviewView (#11320)
* perf(refactor): consolidate getState calls in resolveWebviewView
Replace three separate this.getState().then() calls with a single
await this.getState() and destructuring. This avoids running the
full getState() method (CloudService calls, ContextProxy reads, etc.)
three times during webview view resolution.
* fix: keep getState consolidation non-blocking to avoid delaying webview render
---------
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
* fix: harden command auto-approval against inline JS false positives (#11382)
* feat: rename search_and_replace tool to edit and unify edit-family UI (#11296)
* Revert "refactor: delete orphaned per-provider caching transform files (#11388)"
This reverts commit 13a45b0361.
* chore: regenerate built-in-skills.ts with updated formatting
* fix: add missing maxReadFileLine property to test baseState
The ExtensionState type now requires maxReadFileLine property (added in commit 63e3f769a).
Update the test to include this property with the default value of -1 (unlimited reading).
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat: add pnpm serve command for code-server development (#10964)
Co-authored-by: Roo Code <roomote@roocode.com>
* chore: remove Feature Request from issue template options (#11141)
Co-authored-by: Roo Code <roomote@roocode.com>
* refactor(docs-extractor): simplify mode to focus on raw fact extraction (#11129)
* Add cli support for linux (#11167)
* fix: replace heredocs with echo statements in cli-release workflow (#11168)
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* Drop MacOS-13 cli support (#11169)
* fix(cli): correct example in install script (#11170)
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* feat: add Kimi K2.5 model to Fireworks provider (#11177)
* feat(cli): improve dev experience and roo provider API key support (#11203)
- Allow --api-key and ROO_API_KEY env var for the roo provider instead of
requiring cloud auth token
- Switch dev/start scripts to use tsx for running directly from source
without building first
- Fix path resolution (version.ts, extension.ts, extension-host.ts) to
work from both source and bundled locations
- Disable debug log file (~/.roo/cli-debug.log) unless --debug is passed
- Update README with complete env var table and dev workflow docs
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* Roo Code CLI v0.0.50 (#11204)
* Roo Code CLI v0.0.50
* docs(cli): add --exit-on-error to changelog
---------
Co-authored-by: Roo Code <roomote@roocode.com>
* feat(cli): update default model from Opus 4.5 to Opus 4.6 (#11273)
Co-authored-by: Roo Code <roomote@roocode.com>
* feat(web): replace Roomote Control with Linear Integration in cloud features grid (#11280)
Co-authored-by: Roo Code <roomote@roocode.com>
* Add linux-arm64 for the roo cli (#11314)
* chore: clean up repo-facing mode rules (#11410)
* Make CLI auto-approve by default with require-approval opt-in (#11424)
Co-authored-by: Roo Code <roomote@roocode.com>
* Add new code owners to CODEOWNERS file
* Update next.js (#11108)
* feat(web): Replace bespoke navigation menu with shadcn navigation menu (#11117)
Co-authored-by: Roo Code <roomote@roocode.com>
---------
Co-authored-by: SannidhyaSah <sah_sannidhya@outlook.com>
Co-authored-by: Sannidhya <sann@Sannidhyas-MacBook-Pro.local>
Co-authored-by: roomote[bot] <219738659+roomote[bot]@users.noreply.github.com>
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: Hannes Rudolph <hrudolph@gmail.com>
Co-authored-by: 0xMink <dennis@dennismink.com>
Co-authored-by: Robert McIntyre <robertjmcintyre@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
Co-authored-by: Matt Rubens <mrubens@users.noreply.github.com>
Co-authored-by: Chris Estreich <cestreich@gmail.com>
Revert to pre-AI-SDK state (commit 67e568f6b)
This commit reverts the codebase to the state before AI SDK migration work began.
Target commit: 67e568f6b - refactor: replace fetch_instructions with skill tool and built-in skills (#10913)
Date: January 29, 2026
This removes approximately 152 commits of AI SDK migration work.
A follow-up PR will add back bug fixes and features that are unrelated to AI SDK.
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
* Latest main branch snapshot from API
* feat: add dedicated Azure OpenAI provider using @ai-sdk/azure package
* feat: add Azure provider UI component and translations
* feat: add Azure provider translations for all locales
* chore: add missing Azure placeholder translations
* Delete .changeset/azure-ai-sdk-migration.md
* fix: add Azure provider validation for onboarding workflow
- Add azureApiKey to SECRET_STATE_KEYS for proper configuration detection
- Add Azure validation case in validateModelsAndKeysProvided
- Add validation translations for azureResourceName and azureDeploymentName across all 18 locales
This fixes the issue where the Finish button does nothing when setting up Azure provider in the onboarding workflow.
* feat(azure): add model metadata, model picker, rename to Azure AI Foundry
- Add static model metadata for 29 Azure models (from models.dev)
with Roo-specific flags (reasoning, tools, verbosity) matching
openAiNativeModels
- Add model picker dropdown to Azure provider settings for model
capability detection (context window, max tokens, pricing)
- Rename provider label from 'Azure OpenAI' to 'Azure AI Foundry'
across all 18 locales
- Make API key optional (supports Azure managed identity / Entra ID)
- Update default API version from 2024-08-01-preview to 2025-04-01-preview
- Fix maxOutputTokens validation (filter invalid values <= 0)
- Handler separates deployment name (API calls) from model ID
(capability lookup) with azureDefaultModelInfo (gpt-4o) fallback
- Remove unhelpful 'Get Azure AI Foundry Access' button
- Prevent stale model IDs from other providers carrying over
- Suppress validation errors on fresh provider selection
* fix(azure): add missing isAiSdkProvider() override for reasoning block preservation
* Azure Fixes for Hannes
* Quick Fix for Respones API Only (for Hannes)
* fix: use explicit azureOpenAiDefaultApiVersion fallback when apiVersion is empty
Addresses review feedback: the UI placeholder shows '2025-04-01-preview' via
azureOpenAiDefaultApiVersion, so the handler should use the same constant as
fallback instead of silently deferring to the SDK's internal default.
* fix: remove stale Cerebras references (retired provider)
* fix: add missing retiredProviderMessage translations for all locales
* fix: do not map promptCacheMissTokens to cacheWriteTokens for Azure
Azure uses OpenAI-compatible caching which does not report cache write
tokens separately. promptCacheMissTokens represents tokens NOT found in
cache (processed from scratch), not tokens written to cache. This aligns
the Azure handler with the OpenAI native handler behavior.
---------
Co-authored-by: Hannes Rudolph <hrudolph@gmail.com>
Co-authored-by: Roo Code <roomote@roocode.com>
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
Co-authored-by: Matt Rubens <mrubens@users.noreply.github.com>
* refactor: remove 9 low-usage providers (Phase 0)
Remove Cerebras, Chutes, DeepInfra, Doubao, Featherless, Groq,
Hugging Face, IO Intelligence, and Unbound providers from the codebase.
Each provider removal includes: handler, tests, model definitions,
type schemas, UI settings components, fetchers, i18n references,
and all wiring in shared registration/config files.
- Delete 42 provider-specific files (handlers, tests, fetchers, UI components)
- Remove @ai-sdk/cerebras and @ai-sdk/groq npm dependencies
- Clean provider references from 68 shared files across src/, packages/types/,
webview-ui/, and apps/cli/
- Remove ~490 dead i18n translation keys across 36 locale files
- Add docs/ai-sdk-migration-guide.md with updated migration status
- All TypeScript checks pass, 6505 tests pass with 0 failures
* feat: show retired-provider message for removed provider profiles
Preserve API profiles that reference removed providers instead of
silently stripping their apiProvider. When a user selects a profile
configured for a retired provider, the settings UI now shows an
empathetic message explaining the removal instead of the provider
configuration form.
- Add retiredProviderNames array and isRetiredProvider() helper to
packages/types/src/provider-settings.ts
- Update ProviderSettingsManager sanitization to preserve retired
providers (only strip truly unknown values)
- Update ContextProxy sanitization to preserve retired providers
- Render retired-provider message in ApiOptions.tsx when selected
provider is in the retired list
- Add tests for sanitization, ContextProxy, and UI behavior
* feat: add retired-provider warning banner in chat view
* Revert "feat: add retired-provider warning banner in chat view"
This reverts commit dd593e1056.
* feat: show retired-provider message as inline chat response
* fix: show retired provider warning on home screen
Move WarningRow outside {task && ...} conditional so it renders
regardless of task state. Preserve user input on retired provider
intercept so text isn't lost when switching providers.
- Move showRetiredProviderWarning WarningRow to unconditional render
area near ProfileViolationWarning
- Remove setInputValue/setSelectedImages clearing from retired
provider early return in handleSendMessage
- Delete unused RetiredProviderWarning.tsx (dead code)
* fix: address PR review — passthrough retired-provider fields and i18n strings
- Use passthrough() in saveConfig() and load() so legacy provider-specific
fields (e.g. groqApiKey, deepInfraModelId) are preserved instead of
silently stripped by strict Zod parse()
- Move hardcoded English strings in ApiOptions.tsx and ChatView.tsx to
i18n translation keys (settings:providers.retiredProviderMessage,
chat:retiredProvider.{title,message,openSettings})
- Update tests to assert legacy provider-specific fields survive
save and load round-trips
* i18n: add retired-provider translations for all 17 locales
Translate providers.retiredProviderMessage (settings) and
retiredProvider.{title,message,openSettings} (chat) into ca, de, es,
fr, hi, id, it, ja, ko, nl, pl, pt-BR, ru, tr, vi, zh-CN, zh-TW.
* test: update ApiOptions retired-provider test to expect i18n key
* chore(cli): prepare release v0.0.52
* Update CHANGELOG for build cleanup and Linux support
Removed unused dependency from build configuration and added Linux support.
* feat: migrate Bedrock provider to AI SDK
Replace the raw AWS SDK (@aws-sdk/client-bedrock-runtime) Bedrock handler
with the Vercel AI SDK (@ai-sdk/amazon-bedrock). Reduces provider from
1,633 lines to 575 lines (65% reduction).
Key changes:
- Use streamText()/generateText() instead of ConverseStreamCommand/ConverseCommand
- Use createAmazonBedrock() with native auth (access key, secret, session,
profile via credentialProvider, API key, VPC endpoint as baseURL)
- Reasoning config via providerOptions.bedrock.reasoningConfig
- Anthropic beta headers via providerOptions.bedrock.anthropicBeta
- Thinking signature captured from providerMetadata.bedrock.signature
on reasoning-delta stream events
- Thinking signature round-tripped via providerOptions.bedrock.signature
on reasoning parts in convertToAiSdkMessages()
- Redacted thinking captured from providerMetadata.bedrock.redactedData
- isAiSdkProvider() returns true for reasoning block preservation
- Keep: getModel, ARN parsing, cross-region inference, cost calculation,
service tier pricing, 1M context beta
Tests: 83 tests skipped (mock old AWS SDK internals, need rewrite for
AI SDK mocking). 106 tests pass. 0 tests fail.
* fix: address review feedback for Bedrock AI SDK migration
- Wire usePromptCache into AI SDK via providerOptions.bedrock.cachePoint
on system prompt and last two user messages
- Remove debug logger.info that fires on every stream event with
providerMetadata
- Tighten isThrottlingError to match 'rate limit' instead of broad
'rate'/'limit' substrings that false-positive on context length errors
- Use shared handleAiSdkError utility for consistent error handling
with status code preservation for retry logic
* fix: bedrock AI SDK migration - fix usage metrics, rewrite tests, remove dead code
- Fix reasoningTokens always 0 (usage.details?.reasoningTokens → usage.reasoningTokens)
- Fix cacheReadInputTokens always 0 (read from usage.inputTokenDetails instead of providerMetadata)
- Fix invokedModelId not extracted for prompt router cost calculation
- Rewrite all 6 skipped bedrock test suites for AI SDK mocking pattern (140 tests pass)
- Remove dead code: bedrock-converse-format.ts, cache-strategy/ (6 files, ~2700 lines)
* chore: remove dead @anthropic-ai/bedrock-sdk dep and stale AWS SDK mocks
* chore: update pnpm-lock.yaml after removing @anthropic-ai/bedrock-sdk
* fix: compute cache point indices from original Anthropic messages before AI SDK conversion
The previous approach naively targeted the last 2 user messages in the
post-conversion AI SDK array, but convertToAiSdkMessages() splits user
messages containing tool_results into separate tool + user messages,
causing cache points to land on the wrong messages (tiny text fragments
instead of the intended meaty user turns).
Now we identify the last 2 user messages in the original Anthropic
message array (matching the Anthropic provider's caching strategy) and
build a parallel-walk mapping to apply cachePoint to the correct
corresponding AI SDK message.
* perf: optimize prompt caching with 3-point message strategy + anchor for 20-block window
Previous approach only cached the last 2 user messages (using 2 of 4
available cache checkpoints for messages). This left significant cache
savings on the table for longer conversations.
New strategy uses up to 3 message cache points (+ 1 system = 4 total):
- Last user message: write to cache for next request
- Second-to-last user message: read from cache for current request
- Anchor message at ~1/3 position: ensures the 20-block lookback window
from the second-to-last breakpoint hits a stable cache entry, covering
all assistant/tool messages in the middle of the conversation
Also extracted the parallel-walk mapping logic into a reusable
applyCachePointsToAiSdkMessages() helper method.
Industry benchmarks show 70-95% token cache rates are achievable;
this change should significantly improve our 39% baseline for longer
multi-turn conversations.
* chore: remove stale bedrock-sdk external, fix arnInfo property name, remove unused exports
---------
Co-authored-by: daniel-lxs <ricciodaniel98@gmail.com>
When using slash commands with `mode:` frontmatter (e.g., `/cli-release`
with `mode: code`), the CLI would fail with "Could not resolve
authentication method" from the Anthropic SDK, even when using a
non-Anthropic provider like `--provider roo`.
Root cause: In `markWebviewReady()`, the `webviewDidLaunch` message was
sent before `updateSettings`, creating a race condition. The
`webviewDidLaunch` handler's "first-time init" sync would read
`getState()` before CLI-provided settings were applied to the context
proxy. Since `getState()` defaults `apiProvider` to "anthropic" when
unset, this default was saved to the provider profile. When a slash
command triggered `handleModeSwitch()`, it found this corrupted profile
with `apiProvider: "anthropic"` (but no API key) and activated it,
overwriting the CLI's working roo provider configuration.
Fix:
1. Reorder `markWebviewReady()` to send `updateSettings` before
`webviewDidLaunch`, ensuring the context proxy has CLI-provided
values when the initialization handler runs.
2. Guard the first-time init sync with `checkExistKey(apiConfiguration)`
to prevent saving a profile with only the default "anthropic"
fallback and no actual API keys configured.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
- Allow --api-key and ROO_API_KEY env var for the roo provider instead of
requiring cloud auth token
- Switch dev/start scripts to use tsx for running directly from source
without building first
- Fix path resolution (version.ts, extension.ts, extension-host.ts) to
work from both source and bundled locations
- Disable debug log file (~/.roo/cli-debug.log) unless --debug is passed
- Update README with complete env var table and dev workflow docs
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
