mirror of
https://github.com/abhigyanpatwari/GitNexus.git
synced 2026-09-22 00:31:17 +00:00
df08ecc397
* perf(lbug): add PROF_LBUG_LOAD persistence-path timing breakdown (#2203 U1) loadGraphToLbug is un-timed today; the analyze 'emit' number is the scope-resolution emit bucket, not the CSV->COPY persistence path. Add a zero-cost-when-off per-stage breakdown (csv-emit/copy-nodes/rel-split/ copy-rels/fallback/total + node/rel counts) gated by PROF_LBUG_LOAD=1, mirroring the PROF_SCOPE_RESOLUTION pattern. Document the flag in README. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * perf(lbug): route relationships to per-pair CSVs in the emit pass (#2203 U2) Relationships were written once to a monolithic relations.csv, then re-read line-by-line (regex per edge) and re-split into per-FROM->TO-label-pair files before COPY — writing and reading the entire ~1M-edge set twice. Route each edge to its pair file directly during the single emit pass via a shared RelPairRouter, eliminating the monolithic write + re-read + per-edge regex. The router applies the SAME getNodeLabel + validTables filter as the legacy splitRelCsvByLabelPair, which is retained as a differential oracle. A new differential test asserts the direct-emit per-pair files are byte-for-byte identical to the oracle's, with identical skip/total accounting. The prof line (U1) drops its rel-split stage (routing now folds into csv-emit). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * perf(lbug): skip per-row microtask tick in BufferedCSVWriter (#2203 U3) addRow awaited an already-resolved promise on every buffered row, scheduling a microtask per node even when nothing flushed (millions at scale). It now returns a promise ONLY when it flushes; the node-emit loop awaits once per iteration after the switch. Flush/drain semantics are unchanged, so backpressure on the rows that actually write is preserved and the emitted CSV bytes are byte-identical (covered by the determinism + differential tests). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * bench(lbug): emit throughput + byte-identity gate for the persistence path (#2203 U4) Build-free bench (bench/emit-persistence/measure.mjs) times streamAllCSVsToDisk on a synthetic graph at two scales and gates: (1) an order-independent sha256 fingerprint over every emitted CSV line — the byte-identity guard for the U2/U3 emit optimisations — and (2) a scaling-ratio budget catching an O(n^2) emit re-regression. Wired into ci-tests.yml alongside the cfg/scope-capture benches. The LadybugDB COPY half needs a real DB, so its timing stays in PROF_LBUG_LOAD + the integration round-trip tests (documented in the bench README, with the deferred COPY-parallelism follow-up). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(review): apply autofix feedback (#2203) - P1: router backpressure drain-await rejected with a generic AbortError, masking the real EMFILE/disk-full error. Expose RelPairRouter.lastError and rethrow it in the emit catch — mirrors the oracle's throw streamError ?? err. - P1: cover RelPairRouter error + backpressure + teardown paths with a new unit test (test/unit/rel-pair-routing.test.ts) using an injected mock stream. - P2: wrap streamAllCSVsToDisk body in try/finally so the setMaxListeners bump is always restored (the U2 rel-routing throw path could leak it). - P2: dedup WriteStreamFactory — re-export the canonical type from rel-pair-routing instead of a second identical declaration. - P2: annotate splitRelCsvByLabelPair @internal as the retained differential oracle so a future dead-code sweep doesn't delete the byte-identity guard. - P3: differential test now covers the proc_ prefix + clears GITNEXUS_SORT_GRAPH_OUTPUT to prevent env-leak desync. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * docs(lbug): scope byte-identity to quote-free ids + lock the quote-in-id divergence (#2215 review) The 'byte-identical' claim was unconditional, but the router derives labels from the raw id while the retained splitRelCsvByLabelPair oracle re-derives them via a regex over the escaped row — so for an id containing a double-quote they diverge (the router is the more-correct path). Soften the wording in rel-pair-routing.ts, the bench README, and the differential-test comment to document the exception, and add a differential test asserting the intended divergence (router routes the quote-in-id edge; oracle drops it) so a future change can't silently revert to the buggy regex semantics. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * bench(lbug): per-file fingerprint so the gate catches pair-file mis-routing (#2215 review) fingerprintEmit flattened every line of every per-pair file into one array, sorted globally, and hashed — losing file boundaries, so a row routed to the WRONG pair file produced an identical fingerprint. Hash a per-file digest (filename + sha256(file bytes)) and combine the sorted entry list, so mis-routing (and within-file row reordering) now changes the fingerprint. Baseline regenerated; the new scheme yields a different hash on byte-identical emit, confirming it is sensitive to file structure the old flatten ignored. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * bench(lbug): add absolute large-scale wall-time backstop to the emit gate (#2215 review) The scaling-ratio gate only compares large/small, so a uniform Nx slowdown at both scales passes with ratio ~1.0. Add an opt-in max_ms_large ceiling (1000ms vs observed ~200ms — generous, host-noise-tolerant) that --check enforces alongside the ratio, catching a gross absolute regression the ratio misses. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(lbug): cover the sorted-output path in the byte-identity differential (#2215 review) The differential test only exercised the default insertion-order emit path. Add a case under GITNEXUS_SORT_GRAPH_OUTPUT=1 that feeds the oracle the same id-sorted order orderedRelationships() uses and asserts per-pair byte-identity, so within-pair row reordering on the sorted path can't slip past the gate. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(lbug): cover the invalid-TO-label skip branch (#2215 review) Only an invalid-FROM label was exercised; the validTables skip is an OR over both endpoints, so the invalid-TO branch was untested (an inverted && would have slipped through). Add a valid-FROM/invalid-TO edge to the differential test and the router unit test, asserting it's skipped identically by router and oracle. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(lbug): exercise the BufferedCSVWriter FLUSH_EVERY boundary in vitest (#2215 review) The U3 addRow change (returns a flush promise only on flush; undefined when buffered) and the loop's `if (pending) await pending` were only crossed by the bench, never vitest (all fixtures are <500 nodes). Add a 600-node graph through streamAllCSVsToDisk asserting all rows land exactly once across the 500-row flush boundary — no drops, dups, or corruption. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(lbug): drop redundant step cast in buildRelRow (#2215 review) GraphRelationship.step is already typed number?, so (rel as { step?: number }).step was a no-op structural cast that obscured the shared-type coupling. Use rel.step directly. Byte-identical — bench fingerprint unchanged, differential test green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(lbug): make the unknown-label node drop explicit (#2215 review) With the U3 `let pending` switch idiom, a node whose label matches neither codeWriterMap nor multiLangWriters left `pending` undefined and was silently dropped — a footgun for a future node type. Add an explicit else with a comment documenting that unknown labels are intentionally not persisted and that a new type must be wired into a writer map. No behavior change (byte-identity + tests unchanged). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(lbug): drop the unused WriteStreamFactory re-export (#2215 review) The type was re-exported from lbug-adapter 'to preserve this module's surface,' but no external code imports it by name from here (the only test reference is a comment). Keep the import from rel-pair-routing.ts (its canonical home, still used by splitRelCsvByLabelPair's signature) and drop the dead re-export. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|---|---|---|
| .. | ||
| cfg | ||
| cli | ||
| group | ||
| mcp | ||
| optional-grammars | ||
| resolvers | ||
| analyze-embedding-flags-e2e.test.ts | ||
| analyze-heap-oom-e2e.test.ts | ||
| analyze-wal-checkpoint-failure.test.ts | ||
| antigravity-hook-e2e.test.ts | ||
| api-impact-e2e.test.ts | ||
| api-query.test.ts | ||
| ast-helpers-object-literal-binding.test.ts | ||
| augmentation.test.ts | ||
| basicblock-roundtrip.test.ts | ||
| c-cpp-typedef-legacy-parse.test.ts | ||
| class-impact-all-languages.test.ts | ||
| cli-e2e.test.ts | ||
| cobol-pipeline-benchmark.test.ts | ||
| context-typed-property.test.ts | ||
| cpp-adl-benchmark.test.ts | ||
| cpp-pipeline-benchmark.test.ts | ||
| cross-file-binding.test.ts | ||
| csharp-pipeline-benchmark.test.ts | ||
| csharp-scope-capture-tripwire.test.ts | ||
| csv-pipeline.test.ts | ||
| enrichment.test.ts | ||
| expo-routes.test.ts | ||
| fastapi-prefix-pipeline.test.ts | ||
| filesystem-walker.test.ts | ||
| go-multi-name-worker-metadata.test.ts | ||
| go-pipeline-benchmark.test.ts | ||
| grammar-introspection.test.ts | ||
| grammar-literal-validation.test.ts | ||
| has-method.test.ts | ||
| hooks-e2e.test.ts | ||
| ignore-and-skip-e2e.test.ts | ||
| impact-ambiguous-blast-radius.test.ts | ||
| impact-epistemic-lower-bound.test.ts | ||
| java-class-impact.test.ts | ||
| js-array-method-callback-attribution.test.ts | ||
| lbug-close-handle-release.test.ts | ||
| lbug-core-adapter.test.ts | ||
| lbug-load-prof.test.ts | ||
| lbug-lock-retry.test.ts | ||
| lbug-non-ascii-path.test.ts | ||
| lbug-open-retry.test.ts | ||
| lbug-orphan-sidecar-recovery.test.ts | ||
| lbug-pool-stability.test.ts | ||
| lbug-pool.test.ts | ||
| lbug-readonly-init.test.ts | ||
| lbug-vector-extension.test.ts | ||
| literal-collectors.test.ts | ||
| local-backend-calltool.test.ts | ||
| local-backend.test.ts | ||
| local-symbol-pruner-pipeline.test.ts | ||
| markdown-processor-crlf.test.ts | ||
| multi-branch-analyze.test.ts | ||
| object-literal-method-exports.test.ts | ||
| object-literal-owner-resolution.test.ts | ||
| orm-dataflow.test.ts | ||
| parse-impl-chunk-concurrency.test.ts | ||
| parse-impl-clone-skip.test.ts | ||
| parse-impl-env-reads.test.ts | ||
| parse-impl-large-fixture.test.ts | ||
| parse-impl-progress-monotonic.test.ts | ||
| parse-impl-quarantine-cache-skip.test.ts | ||
| parsing.test.ts | ||
| pdg-query.test.ts | ||
| php-pipeline-benchmark.test.ts | ||
| php-scope-capture-tripwire.test.ts | ||
| pipeline-graph-golden.test.ts | ||
| pipeline.test.ts | ||
| python-import-index-reuse.test.ts | ||
| python-scope-capture-tripwire.test.ts | ||
| qualified-class-lookups.test.ts | ||
| query-compilation.test.ts | ||
| ruby-pipeline-benchmark.test.ts | ||
| ruby-scope-capture-tripwire.test.ts | ||
| rust-pipeline-benchmark.test.ts | ||
| rust-scope-capture-tripwire.test.ts | ||
| search-core.test.ts | ||
| search-pool.test.ts | ||
| server-analyze.test.ts | ||
| server-http-startup.test.ts | ||
| setup-antigravity.test.ts | ||
| setup-skills.test.ts | ||
| setup-uninstall-roundtrip.test.ts | ||
| shape-check-regression.test.ts | ||
| skills-e2e.test.ts | ||
| spring-route-pipeline.test.ts | ||
| staleness-and-stability.test.ts | ||
| swift-scope-capture-tripwire.test.ts | ||
| taint-explain.test.ts | ||
| tree-sitter-languages.test.ts | ||
| vue-pipeline-benchmark.test.ts | ||
| worker-pool.test.ts | ||